About Me
I am a Professor of Mining Engineering at the Indian Institute of Technology (Banaras Hindu University), Varanasi, India since 15^th May 2010. I am a fellow of the Institution of Engineers of India and Life Member, ISRM & ISRMTT. Once, I was a Professional member of the SME, USA, also. Institute nominated me for MHRD LEAP training in 2018 @IIT, Kanpur and NTU, Singapore. I joined this institute on the 19^th March 1993 as Lecturer in Mining Engineering. Before that I had had a brief stint with the National Airports Authority of India as an Aerodrome Officer.
Engineering and Technology have to innovate and evolve so that the seven billion odd people could survive on this planet with comfort, security, thrill, enthusiasm, and dignity in an eco-friendly way. Aware of this responsibility- I am attempting to cater to societal needs through need-based research and academic courses and technological solutions in the areas of Mining Engineering. I have been actively researching and consulting in the areas of Numerical modeling in Rock engineering, Environmental Management Capacity Building (EMCB), Subsidence prediction and management, Rock reinforcements, Rock instrumentation, Rock Blasting and fragmentation, Underground Space Technology, Mine Safety, and Legislation and Mine Management. I have completed two Research Projects- one of the World Bank under EMCB and another of the CSIR, Govt of India on Numerical modeling of Jointed Rock-mass. I have guided three doctoral thesis in the area of Rock blasting and Suspended particulate matter dispersion modeling and am guiding nine of them. Under me 34 M Tech theses have been awarded.
I have served as an expert in much prestigious Government and Non-Government organizations for Doctoral thesis examinations and selection committees.
I have completed  122 technical consultancy reports- where some of my clients included NTPC, Adani Power, CESC, High Court of Allahabad, JITF,  Accountant General of Uttar Pradesh, Coal Mining Conglomerates, Uttar Pradesh Irrigation Department, UPEIDA,  and others.  I have convened many National and International Symposia and edited eight proceedings on various themes. I have published fifty research papers in International and national Journals and conferences. I have also coordinated many outreach programmes for the field executives of ACC, BHEL, Powergrid, Coal India Ltd. and many others- in the areas of my expertise.
I am quite appreciated as an acclaimed orator. I  have delivered more than 175 invited/expert lectures in the areas of Rock Mechanics, Management, Higher Education, Leadership, Motivation, Literature and Philosophy. Notable ones being keynote lecture at the Indo-Swedish International Philosophical Conference on Practice based Knowledge. I was invited as a motivational speaker at the Rotary Club District Conference. I have been regularly contributing as an expert speaker at the UGC-Academic Staff College, Banaras Hindu University for University/College faculty members. I have also lectured for the students/ research scholars on current themes.
I have made a humble contribution towards system maintenance and building whenever Institute entrusted me the task. I was a member of the committee that formulated the Post Graduate Ordinances of the IIT(BHU), Varanasi. I was Head, Department of Mining Engineering (23^rd April 2016 to 22^nd April 2019), Chairman, Administrative Monitoring Committee & the Institute Lecture Series, IIT(BHU), Varanasi, Chairman, Admin Reforms Committee, BHU and member, CEP and Conference Committee and Senate Library Committee and the Advisor, Training and Placement of the Institute. I was Coordinator of the Gandhi Technology Alumni Centre, Administrative Warden of the First-year students for three years, Member, Careers and Higher Education Committee of the University and the Management Committee of the University Cafeteria and NSS officer.

Dr. SANJAY KUMAR SHARMA, F.I.E.
Designation: Professor of Mining Engineering
Current Assignments:
                                                               Convenor, ICOMS, 2019 Northern Coalfields Limited, Singrauli
                                       National        : Member, Joint Programme Implementation Committee, NCL- IIT(BHU), MoU
Previous Assignment
Chairman MPES 2020 till 15th January, 2020
Head of the Department, Department of Mining Engineering, IIT(BHU), Varanasi
Chairman, Institute Lecture Series, IIT(BHU), Varanasi
Chairman, Administrative Monitoring Committee, IIT(BHU), Varanasi
Chairman, Administrative Reforms Committee, Banaras Hindu University, Varanasi
Coordinator, Seminar Portal and Knowledge Portal, IIT(BHU), Varanasi
Coordinator, GTAC, IIT(BHU), Varanasi Guest House, IIT(BHU), Varanasi
Administrative Warden, Limbdi Hostel, IIT(BHU), Varanasi
Programme Officer, IIT(BHU), Varanasi, National Service Scheme 
Address :  Department of Mining Engineering
                  Indian Institute of Technology (Banaras Hindu University),Varanasi
                  221005, (U.P.), India
   Phones:+ 91- 9450 950078/ +91-542- 2369442
   E-mail :    sksharma.min@itbhu.ac.in
Permanent Address :
                    B-44, Swastik Towers, Lanka,
                    Varanasi 221005, U.P. India

Experience: Serving as faculty since  19th March, 1993 and as Professor, Mining Engineering since 15th May, 2010

Qualification: Ph. D. in Mining Engineering, M. Tech. in Mine Planning, and Bachelor of Engineering in Mining Engineering

Training and Courses attended:
                   (1) Leadership for the Academicians Programme (LEAP) in 2018 @IIT, Kanpur and NTU, Singapore
                   (2) Three Refresher Courses
                   (3) One Orientation Course

Sex : Male
Marital Status : Married
Nationality : Indian
Academic Record –

Ph. D. Thesis Topic: "Numerical Simulation of Underground Structures in Coal Mines." (It had numerical modeling and rock instrumentation work for blasting gallery panels)
Training and Courses attended:
                   (1) Leadership for the Academicians Programme (LEAP) in 2018 @IIT, Kanpur and NTU, Singapore
                   (2) Three Refresher Courses
                   (3) One Orientation Course

APPOINTMENTS HELD

56. Gagan Gupta, Sharma, Sanjay Kumar & Singh, G.S.P. ( 2021) : "Numerical Modelling Based Stability Analysis of Waste Dump Slope Structures in Open Pit Mines - A Review" J. Inst. of Eng. (India): Series D [Index in : SCOPUS]
 
55. Anand Kumar, Pusker Singh, Sanjay Kumar Sharma, Nawal Kishore and C. S. Singh (2021): “Quantitative assessment of BIGV and structural response based on velocity and frequency around an opencast mine” CURRENT SCIENCE, VOL. 120, 2021 
54. Yadav, Devendra et.al. & Sharma, S. K. (2021): “Experimental and Computational Study on Slope Failure Prediction in Open-Cast Mines using Time Domain Reflectometry” Journal of Mining Sciences, 56, 
53. Yadav, Devendra et.al. & Sharma, S. K. (2021): “Application of IoT-Fog- based Real-time Monitoring system for Open-cast Mines- A Survey”, J IET Wireless Sensor Systems , V. 11(1), pp. 1-21, February, 2021. DOI: 10.1049/wss2.12011. 
52. Behera, B., Yadav, A., Singh, G. S. P. , Sharma, S. K. (2020): “A Numerical Modeling Approach for Evaluation of Spalling Associated Face Instability in Longwall Workings under Massive Sandstone Roof,” Engineering Failure Analysis, [Elsevier IF 2.897, SCIE- Q1] October, 2020, https://doi.org/10.1016/j.engfailanal.2020.104927. 
 
51. Sahoo S. K., Behera, B, Yadav, A, Singh GSP, Sharma S K (2020): “Plane- Strain Modelling of Progressive Goaf Compaction in a Depillaring Working, J. Inst. of Eng. (India): Series D [Index in : SCOPUS], DOI:10.1007/s40033-020- 00233-2, September, 2020. 
 
50.Sahoo, S.K., Singh, G.S.P., Sharma, S.K., Singh, U. K. (2020): Numerical Modeling Study of the Influence of Softcover on Strata and Support Behavior in a Bord and Pillar Depillaring Working. Mining, Metallurgy & Exploration 37, 1151–1168 (8/2020). https://doi.org/10.1007/s42461-020-00246-1
 
49. Yadav, A., Behera, B., Sahoo, S. K., Singh, G S P, Sharma, Sanjay K. (2019): “An approach for numerical modeling of gob compaction process in Longwall Mining”, J. Mining, Metallurgy & Exploration, [Index in : SCI Expanded, IF 0.784], 37, pp.631–649 (2020). https://doi.org/10.1007/s42461-020-00182-0, USA.
 
48. Yadav, A, Behera, B., Sahoo, S. K. Singh, G S P, Sharma, Sanjay K. (2020): “Numerical Analysis of the Gob Stress Distribution Using a Modified Elastic Model as the Gob Constitutive Model”, J. Inst. Of Eng. (India): Series D [Index in : SCOPUS], published online on 24th April, 2020, p.13, Doi- https://doi.org/10.1007/s40033-020-00214-5., April, 2020. 
 
47. Behera, B., Yadav, A., Singh, G S P, Sharma, Sanjay K. (2020): “Design of an Optimum Longwall Face length for improved Ground Control: A Review”, J. Inst. Of Eng. (India): Series D [Index in : SCOPUS], published online on 29th April, 2020, p. 14, Doi-https://doi.org/10.1007/s40033-020-00216-3, April, 2020. 
 
46. Prajapati, S. K., Yadav, A., Behera, B., Sahoo, S. K., Singh, G S P, Sharma, Sanjay K. (2020): “An innovative methodology for improved simulation of goaf compaction in Longwall workings using FLAC3D”, Proc. Applied Numerical Modelling in Geomechanics-2020, Billaux, Hazzard, Nelson & Schopfer (eds.), of  Fifth International Itasca Symposium, Paper 11-13, p.5, Feb. 17-20, 2020, Vienna, Austria, ISBN978-0-9767577-5-7.

45. Behera, B., Yadav, A., Singh, G S P, Sharma Sanjay K. (2019): “Numerical Modeling Study of the Geo-mechanical Response of Strata in Longwall Operations with Particular Reference to Indian Geo-mining Conditions.” Rock Mech Rock Eng [Index in : SCI, IF-4.2], doi:10.1007/s00603-019-02018-w. One of the highest impact factor journal in Rock Mechanics 
 
44. Jaiswal A., Sharma Sanjay K. and Shrivastva B. K. (2004): “A study of asymmetry in the induced stresses over coal mine pillar with advancement of Goaf line through numerical modelling”, Jl. IJRM & Min. Sci, U.K. 41 (2004), 859-864[Index in : SCI]. Citation – 20, World’s one of the top journal in Rock Mechanics 
 
 
 
 
40. Yadav, A, Behera, B., Sahoo, S. K. Singh, G S P, Sharma, Sanjay K. (2020): “Performance Evaluation of Potential Constitutive Models for Simulation of Longwall Goaf Compaction Using Modulus Updating Technique”, Proc. Recent Practices and Advancement in Mineral Industry, VNIT, Department of Mining Engineering, Nagpur, 21-22 February, 2020.
 
39. Kumar B, Sharma Sanjay K, Singh G S P. (2019): “Enhanced prediction of hard rock pillars stability using fuzzy rough feature selection followed by Random Forest.” Jl of Mines, Metals & Fuels, [Index in : SCOPUS] Vol.67: pp 509-514, November 2019. Deployed new mathematical tool for hard rock pillars design 
 
38.Vikas Srivastava, Sharma, Sanjay Kumar and Gauri. S. P. Singh (2019): “Optimization of pixels with data mining and image segmentation for landuse land cover maximum likelihood classification algorithms,” Jl of Mines, Metals & Fuels, [Index in : SCOPUS] Vol.67, No.8, pp 387-390, August 2019. 
 
37. Galav A, Kumar R, Singh GSP and Sharma Sanjay K. (2019): “Numerical Simulation of Water Flow through a Protective Barrier Pillar in Underground Coal Mines”, YSRM 2019: The 5th ISRM Young Scholars’ Symposium on Rock Mechanics & REIF 2019: International Symposium on Rock Engineering for Innovative Future, 1-4 Dec 2019, Okinawa, Japan. 
 
36. Gupta G, Sharma Sanjay K, Singh GSP (2019): “Multiclass Classification of Overburden Dump Slope Stability Conditions deploying Machine Learning’’, YSRM 2019: The 5th ISRM Young Scholars' Symposium on Rock Mechanics & REIF 2019: International Symposium on Rock Engineering for Innovative Future. 1-4 Dec 2019, Okinawa, Japan. Awarded most innovative paper 
35. Gupta G, Sharma Sanjay K, Singh GSP (2019): ‘An Improved Numerical Modelling Approach for Assessment of Instability in Large Overburden Dump Structures’, Proc. 2nd International Conference on Opencast Mining Technology and Sustainability (ICOMS-2019), 13-14 Dec 2019, NCL, India. Awarded best research paper 
34. Sunil Kumar, Sharma, Sanjay Kumar, Brind Kumar,(2019): “Neutralization of Acid Mine Drainage using Fly Ash, Overburden, and Lime,” Proc. of the 2nd International Conference on Opencast Mining Technology & Sustainability, (ICOMS-2019), December 13-14, 2019, pp. 168-173, NCL Singrauli. 
33. Kumar S, Sharma Sanjay K, Kumar B (2019): “An Evaluation of Leachability from Stabilized Fly Ash, Mine Overburden, and Lime Mixtures under Modified Leaching Conditions,” Proc. of the 2nd International Conference on Opencast Mining Technology & Sustainability, (ICOMS-2019), December 13-14, 2019, pp. 183-189, NCL Singrauli. Novel haul road material being attempted 
32. Kumar A, Sharma Sanjay K, Singh CS (2019): Assessment of blast-induced ground vibration based on peak particle velocity and corresponding frequency of an opencast mine. Proc. of the 2nd International Conference on Opencast Mining Technology & Sustainability, (ICOMS-2019), pp. 248-252, NCL Singrauli. 
31.Prasad, Shweta Sharma Sanjay K, Amarendra (2018): “Corporate Social Responsibility”. Proc. 1st International Conference on Opencast Mining Technology & Sustainability, (ICOMS-2018), pp. 248-252, NCL Singrauli. 
30. Vikas Srivastava, Sharma, Sanjay Kumar and Gauri. S. P. Singh (2018): “Coal seam fire area determination using pixel values of the satellite data,” Jl of Mines, Metals & Fuels, [Index in : SCOPUS] Vol.66, No.4, pp 245-247, April 2018. Coal seam fire area determination 
29. Gupta G, Sharma Sanjay K, Singh GSP (2018), “Assessment of Dump Structure Stability via Parametric Study Using Numerical Modeling”, Recent Challenges in Mining Industry (RCMI-2018), pp. 103-112 28th April, 2018; CSIR-CIMFR, Dhanbad. 
28.Tarun Verma. B.K.Shrivastva and Sharma Sanjay K. (2017): “Performance Evaluation of AERMOD for Indian geo-mining conditions,” Research Journal of Mining Volume 1 Issue 2, pp 88-99, (2017). Impact of depth on surface mines vis-à-vis SPM were studied 
27. Gupta G, Sharma Sanjay K, Singh GSP, Verma T and Kishore N (2017), “Engineering Characterization of Dump Material for Numerical Modelling Based Stability Analysis of Slope Structures”, Proc. Advances in Mine Environment, Geotechniques and Ground Control (AMEGGC-2017), pp. 24-30, 2nd December, 2017; NIT Raipur. 
29. Galav A, Sahoo S.K, Singh GSP and Sharma Sanjay K. (2017), “Study of Strata Behaviour in a Contiguous Seam Depillaring Working”, Proc. IC on Deep Excavation, Energy Resource and Production, (DEEP16),paper no. 136, 24-26 Jan 2017, IIT-Kharagpur. Rock instrumentation success story for safe working below ground in contiguous working was reported 
25.Vikas Srivastava and Sharma Sanjay K (2017): Pertinence of GIS for asseveration of Air Quality surveillances for Environment risk due to mining. Fifth International Conference on Remote Sensing and Geo-information of Environment, Cyprus (USA), March 17-19, 2017.
24. Vikas Srivastava and Sharma, Sanjay K (2016): “Development in strategies for mapping of the coal seam fires through RS and GIS vis-à- vis JCF on the Indian continent.” World Congress on GIS and Remote Sensing, New Orleans, Louisiana, (USA), August 01-03, 2016. 
23. Vikas Srivastava and Sharma Sanjay K (2016): “Challenges in data acquisition for modelling sub surface coal fires,” The future for Mining in a Data-driven world, SME 2016 annual conference & expo Phoenix, Arizona (USA), February 21-24, 2016. 
22. Sahoo S.K., Galav A, Behera B, Sharma Sanjay K and Singh GSP (2016): “Strata control monitoring in a contiguous seam depillaring working”, pp 348-352 ISRM Sponsored Conference Recent Advances in Rock Engineering, (RARE- 2016), November 2016, DOI:10.2991/rare-16.2016.55, NIRM, Bangalore. Citation -2 
21. Vikas Srivastava, G S P Singh and Sharma Sanjay K (2015): Recent Advances in RS-GIS Application for Mapping of Uncontrolled fires in Coal Seams, Jl of Mintech, , Vol.63, No.2, pp. 11-19, April-June, 2015. Mapping of Uncontrolled fires were analyzed 
20. Choudhary B. S., Rai P. and Sharma Sanjay K. (2013): "Stemming plugs and its effect on fragmentation and muckpile shape parameters-a case study", Published in the Journal of Mines Metals & Fuels, Vol. 61, No. 7&8, , pp 177-183, August 2013. 
19. Rajeev Srivastava, Singh, C. S., Sharma, Sanjay K., Sethi, Rabindra (2010): “Geotechnical properties of mine waste and fly ash mixture - A laboratory study” Jl Mintech, pp-27-32 Minetech, April-June, 2010, ISSN: 0970-7204. In 2010, the paper did what MoEF is desiring and stipulating now 
18. Sharma, Sanjay K. & Shrivastva, B. K. (2009): ‘A Quantitative Approach for assessing the environmental Consequences of Coal mining’, Enriching Environment, pp 1-18 ISSN: 0974-6064, April, 2009. EMCB project findings were reported 
17. Sharma Sanjay K., (2009): “Field instrumentation and numerical modelling of an underground coal mine” Proc. SINOROCK 2009 ISRM-Sponsored International Symposium on Rock Mechanics, 19-22, May, 2009, University of Hong Kong, China. 
16. Sethi, Rabindra; Sharma, Sanjay K., Gupta, S. & Srivastava, Rajeev (2009): “Study of Strength Characterization of Fly Ash to investigate the Viability of its Use as Construction Material, Proc. Int. Symp. on Rock Mechanics and Geo- environment in Mining and Allied Industries” 12-14 February, 2009, Department of Mining Engineering, I.T., B.H.U., Varanasi. Futuristic work at the time for fly ash 
15. Sharma Sanjay K., & Jain, A. K. (2008): Predictive maintenance of mining equipment for better rock machine interaction pp 123-130, Proc. National Seminar Rock Machine Interaction in Excavations, 7-8 March, 2008, Department of Mining Engineering, I.T.,B.H.U., Varanasi. 
14. Shrivastva, B. K. & Sharma Sanjay K. (2007): “Assessing the environmental consequences of open cast coal mining: A quantitative approach”, pp 89-106 Proc.1st Int. Conf. on Managing the Social and environmental consequences of Coal Mining in India, November, 2007, ISM. Proc. First Intl. Conference on MSECCMI, New Delhi. EMCB project findings were reported 
13. Sharma, Sanjay. K., & Singh, G.S.P.S. (2007): “Demystifying Instrumentation for the Rock Excavations”, pp 1-23, Proc. Technology Exchange Programme on Rock Instrumentation, 6-8 December, 2007, Department of Mining Engineering, I.T., B.H.U., Varanasi. 
12. Rajeev Srivastava, Sharma, Sanjay K., Sethi, Rabindra (2007): The utilization of fly ash: its scope in India, Jl Mintech. Vol.28, No 4, pp 9-14 Minetech, Oct-Dec, 2007, ISSN:0970-7204. 
11. Konari R., Sharma, Sanjay K., Shrivastva B.K. (2005): "Environmental impact assessment of opencast mining project – A quantitative approach" Proc. Technological advancements & environmental challenges in mining & allied industries in the 21st century", 5-6 February, 2005 at N.I.T., Rourkela. 
10. Jaiswal A., Rai Rajesh, Sharma, Sanjay K. and Shrivastva B.K.(2004): “Three Dimensional Numerical Simulation for the Prediction of Subsidence,” Proc. Int. Conf. on Technology and Management for Sustainable Exploitation of Minerals and Natural Resources, 5-7 Feb., 2004, I.I.T, Kharagpur, India. 
9. Sharma Sanjay K. and Shrivastva B.K.(2002): “Safety and Productivity: Are they Mutually Exclusive”, Proc. Nat. Symp. on Sustainable Mining Technology: Present and Future, 14-15 March, 2002, Department of Mining Engg., Anna University, Chennai pp 414-419. 
8. Sharma Sanjay K. (2001) : “Electronic delays : The future of initiation technology for the rock fragmentation”, Proceedings National Seminar on Rock Fragmentation ROCKFRAG-01, 14-15 February, 2001, BHU., Varanasi, pp. 86- 90. 
7. Sharma Sanjay K. (2000): “Rock Bolting: A Versatile Tool of Rock-Mass Reinforcement” Proc. National Symposium on Rock-Mass Reinforcement, 28-29 January 2000, Department of Mining Engineering, I.T., B.H.U., Varanasi. 
6. Sharma Sanjay K. (1998) : “Mine Management – Some Emerging Ethical Issues”, FOSMIN-98, Proc. Nat. Seminar on Outlook for Fossil Fuels and Non- Metallic Mining and Mineral Based Industries, 20-21 August, 1998, Department of Mining Engineering, Anna University, Chennai, pp 21-26. 
5. Sharma Sanjay K. and Rai P. (1998) : “Problems of Public Sector Coal Mining in India”, Proc. Nat. Workshop on Mining in Public and Private Sectors in 21stCentury, 30-31 January, 1998, Department of Mining Engineering, I.T., B.H.U.,Varanasi, pp 81-86. 
4. Sharma Sanjay K. and Singh D.P. (1997): “Environmental Problems in Limestone Mines – Some Suggested Remedies”, Proc. Nat Symp. on Emerging Technology in Surface Mining and Environmental Challenges, 16-18 October, 1997, KREC, Mangalore. 
3. Sharma Sanjay K. (1997): “Ethical Issues in Mining Engineering”, Proc. Workshop on Environmental Ethics in Engineering, 9 May, 1997, Department of Mechanical Engineering, I.T., B.H.U., Varanasi. 
2. Sharma Sanjay K. and Singh D.P. (1994): “Paryavaran Sanrakshan ki Bhartiya Awadharnayein”, Proc. Jharia Koyalanchal Shatabdi Sammelan, C.M.R.I. Dhanbad, 3-4 December, 1994. 
1. Sharma Sanjay K., Singh T.N. and Singh D.P. (1992) : “Critical Appraisal of Pillar Design as Required by Coal Mine Regulations of India vis-à-vis latest Rock Mechanics Formulae”, Proc. 11th Int. Conf. on Ground Control, University of Wollongong, Australia, July 7-10, 1992, pp. 48-57. 
 
 
 
 

 Research Projects

Sl.No.
Investigators
Funding Agency
Project title

1
 
Shrivastva, B.K. & 
Sharma, Sanjay Kumar
CSIR 
(Period: 1994 - 1997; 
Completed: 31 Aug ‘97: 
Grant 5 lakhs).
Effect of Joint Set on Mining Structures – A Numerical Simulation By FEM” 

2
 
Shrivastva, B. K & 
Sharma, Sanjay Kumar
 
World Bank through MoEF under Environmental Management Capacity Building Program
 
A Study of Quantification and Their Weightages for Parameters of Environmental Impact Assessment
(Completed on 31 Dec. 2002)

3
Sharma, Sanjay Kumar, Singh, G.S.P Verma, T. &
Sharma Suresh Kumar 
Sprouting Project from
IIT(BHU), Varanasi
Numerical Modelling of Jointed Rock slopes subjected to dynamic Loading

4
 
Sharma, Sanjay Kumar
Design & Innovation Centre
IIT(BHU), Varanasi
Development of Electric drivetrain and Li-ion Battery pack for Electric Van
 

5
Sharma, Sanjay Kumar & Singh, G.S.P.
Design & Innovation Hub
IIT(BHU), Varanasi
Numerical modelling of rock bolting for support of mine opening

6
Sharma, Sanjay Kumar & Singh, G.S.P.
Design & Innovation Hub
IIT(BHU), Varanasi
Development of an improved cement capsule formulation for better performance of rock bolts

7
Sharma, Sanjay Kumar & Singh, G.S.P.
Design & Innovation Hub
IIT(BHU), Varanasi
Numerical Simulation of Induced Caving

8
 
Sharma, Sanjay Kumar & Singh, G.S.P.
Design & Innovation Hub
IIT(BHU), Varanasi
Investigation into the loading mechanism of chain pillars and design of long wall panels layouts under high
depth of cover

9
Sharma, Sanjay Kumar & Singh, G.S.P.
Design & Innovation Hub
IIT(BHU), Varanasi
Support Design for Longwall Gate Roads Subjected to High Abutment Load

10
Sharma, Sanjay Kumar & Singh, G.S.P.
Design & Innovation Hub
IIT(BHU), Varanasi
Development of a numerical modelling procedure for simulation of the response of a mining structure under dynamic loading condition
 

11
Sharma, Sanjay Kumar
Design & Innovation Hub
IIT(BHU), Varanasi
Cost effective design of safety helmets for underground mines