pmaiti.mst's picture
Prof. Pralay Maiti
Professor
School of Materials Science and Technology,IIT BHU
pmaiti.mst@iitbhu.ac.in
9935141321
Area of Interest: 
Polymer Nanocomposites, Biomaterials, Self-assembly, Biodegradable polymer, Polymer for renewable resource, Radiation Resistance polymer, Fuel cell membrane, Polymer electronics.

Dr. Pralay Maiti is Professor and Ex-Coordinator of the School of Materials Science and Technology. Dr. Maiti has received his Master in Chemistry from Indian Institute of Technology, Kharagpur in 1991 and Ph.D. in Polymer in 1996  from The Indian  Association for the Cultivation of Science (Jadavpur University). He was COE Researcher and Lecturer at Venture Business Laboratory, Hiroshima University, Japan (1997-1999) and was post-doctoral fellow at Toyota Technological Institute, Japan (1999-2001). He was Visiting Scientist at Cornell University, USA from 2002 to 2004. He was Quick Hire Fellow at Central Leather Research Institute, Chennai before joining the School of Materials Science and Technology as Reader in December 2004. His current research interests include Biomaterials and Energy materials.
 

 
 Google scholar Profile: click here
 Research Gate Profile:  click here
 

  • Polymer Nanocomposites
  • Biomaterials & Implants
  • Self-assembly 
  • Biodegradable Polymers 
  • Polymers from Renewable Resources
  • Radiation Resistant Polymer 
  • Fuel cell membrane
  • Shape memory polymers
  • Polymers as energy materials

   
   Selected recent publications:

  1. Injectable hydrogels of newly designed brush biopolymers as sustained drug delivery vehicle for melanoma treatment. Aparna Shukla, Akhand Pratap Singh and Pralay Maiti, Signal Transduction and Targeted Therapy 6:63 1-14 (2021)
  2. Fabrication of Conducting Nanochannels using Accelerator for Fuel cell Membrane and Removal of Radionuclides: Role of Nanoparticles. Om Prakash, Amal M. Mhatre, Rahul Tripathi, Asok K. Pandey, Pravesh K. Yadav, Saif Khan, and Pralay Maiti ACS Applied Materials & Interfaces 12, 17628−17640 (2020)
  3. Enhanced piezoelectric response in nanoclay induced electrospun PVDF nanofibers for energy harvesting. Shivam Tiwari, Anupama Gaur, Chandan Kumar, Pralay Maiti, Energy 171, 485-492 (2019)
  4. Functionalized Thermoplast Polyurethane as Hole Conductor for Quantum Dot Sensitized Solar Cell. Sunil Kumar, Ishwar Maurya, Om Prakash, Pankaj Srivastava, Santanu Das and Pralay Maiti, ACS Applied Energy Materials 1(9), 4641–4650 (2018)
  5. Biodegradable toughened nanohybrid shape memory polymer for smart biomedical applications, Arpan Biswas, Akhand Pratap Singh, Dipak Rana, Vinod K. Aswal and Pralay Maiti Nanoscale 10, 9917–9934 (2018)
  6. Reversible Bidirectional Shape Memory Effect in Polyurethanes through Molecular Flipping, Arpan Biswas, Vinod K. Aswal, P.U. Sastry, Dipak Rana and Pralay Maiti Macromolecules 49, 4889 − 4897 (2016)
  7. Layered Double Hydroxides as Effective Carrier for Anticancer Drugs and Tailoring of Release Rate through Interlayer Anions, Sudipta Senapati, Ravi Thakur, Shiv P. Verma, Shivali Duggal, Durga P. Mishra, Parimal Das, T. Shripathi, Mohan Kumar, Dipak Rana, and Pralay Maiti  Journal of Controlled Release 224, 186–198 (2016)
  8. Nanoclay and Swift Heavy Ions Induced Piezoelectric and Conducting Nanochannel based Polymeric Membrane for Fuel Cel,  Karun Kumar Jana, Anshuman Srivastava, Om Parkash, Devesh K. Avasthi, Dipak Rana, Vinod K.  Shahi and Pralay Maiti Journal of Power Sources 301, 338–347 (2016)
  9. Polyurethane grafted chitosan as new biomaterials for controlled drug delivery, Arun Kumar Mahanta, Vikas Mittal, Nitesh Singh, Debabrata Dash, Sudip Malik, Mohan Kumar and Pralay Mait Macromolecules 48, 2654–2666 (2015)
  10. Poly(vinylidene fluoride-co-hexafluoro propylene) nanohybrid membrane using swift heavy ions irradiation for fuel cell application, Karun Kumar Jana, Amit K. Thakur, Vinod K. Shahi, Devesh K. Avasthi, Dipak Rana, and Pralay Maiti Journal of Materials Chemistry A 3, 10413–10424 (2015)
  11. Functionalized Poly(vinylidene fluoride) Nanohybrid for Superior Fuel Cell Membrane, Karun Kumar Jana, Chumki Charan, Vinod K. Shahi, Kheyanath Mitra, Biswajit Ray, Dipak Rana, and Pralay Maiti 481, 124–136 (2015) Journal of Membrane Science
  12. Nanoparticle and Process Induced Super Toughened Piezoelectric Hybrid Materials: The Effect of  Stretching on Filled System
    Vimal Tiwari, Amit Prasad, Vaishali Singh, Karun Jana, Manjusri Misra, C. Durga Prasad, Pralay Maiti , Macromolecules 46, 5595−5603 (2013)

 

   Complete list of publications:

  1.  Mn Fe2 O4 nano flower: a prospective material for biomodal hyperthermia , S.K.Shaw, J.Kailashiya, Santosh K.Gupta, C.L.Prajapat, Sher Singh Meena, D.Dash, P.Maiti, N.K.Prasad, Journal of Alloys and Compounds (2022)
  2. Performance improvement of CO2 air conditioner by integrating photonic radiative cooler as sub-cooler or/and roof envelope, Jay Prakash Bijarniya, Jahar Sarkar and Pralay Maiti, Energy Conversion and Management 251, 115019 (1-11) (2022)
  3. Dehydro-halogenated Poly(vinylidene fluoride) Based Anion Exchange Membrane for Fuel Cell Applications, Om Prakash, Shyam Bihari, Keshav, Shivam Tiwari, Ravi Prakash and Pralay Maiti , Materials Today Chemistry 23, 100640 (1-8) (2022)
  4. Biocompatible Graft Copolymers of Dextrin and Polyurethane as Potential Delivery Vehicle, Aparna Shukla, Swapan Maity and Pralay Maiti, Carbohydrate Polymer Technologies and Applications 2, 100171(1-10) (2021)
  5. Controlled DNA Delivery using Poly(lactide) Nanoparticles and Understanding the Binding Interactions" Sudipta Senapati, Anurag Upadhyaya, Somnath Dhruw, Debaprasad Giri, Pralay Maiti, Journal of Physical Chemistry B 125(35), 10009–10017 (2021)
  6. Functionalized polythiophene for corrosion inhibition and photovoltaic application, Pravesh Kumar Yadav, Om Prakash, Biswajit Ray, Pralay Maiti, Journal of Applied Polymer Science 138(44):e51306 (1-17) (2021)
  7. Effect of n-Alkyl Side Chain Length on the Thermal and Rheological Properties of PolyN-(3-(alkylamino)-N-(3-(isopropylamino)-3-oxopropyl)acrylamide) Homopolymers, Archana Kumari, Sambhav Vishwakarma, Kheyanath Mitra, Chuangbi Chen, Shuming Cui, Biswajit  , Maiti, Sourov Mondal, Chandra Sekhar Biswas, Pralay Maiti, Florian J. Stadler, Biswajit Ray, Macromolecular Chemistry and Physics 222, 2100118 (1-12) (2021)
  8. Structural and magnetic properties of nanocrystalline equi-atomic spinel high-entropy oxide (AlCoFeMnNi)3O4 synthesised by microwave assisted co-precipitation technique, S K Shaw, A Gangwar, A Sharma, S K Alla, S Kavita, M Vasundhara, Sher Singh Meena, P Maiti, N K Prasad, Journal of Alloys and Compounds 878, 160269 (2021)
  9. γ-Fe2O3 nanoflowers as efficient magnetic hyperthermia and photothermal agent, S K Shaw, J Kailashiya, A Gangwar,   Alla, Santosh K Gupta, C L Prajapat, Sher Singh Meena, D Dash, P Maiti, N K Prasad, Applied Surface Science 560, 150025 (2021)
  10. Ionic Liquid-Based Electrospun Polymer Nanohybrid for Energy Harvesting, Shivam Tiwari, Anupama Gaur, Chandan Kumar, Pralay Maiti, ACS Applied Electronic Materials 3(6), 2738–2747 (2021)
  11. Lithium-Irradiated Poly (vinylidene fluoride) Nanohybrid Membrane for Radionuclide Waste Management and Tracing, Om Prakash, Amol M Mhatre, Rahul Tripathi, Ashok K Pandey, Pravesh K Yadav, Saif A Khan, Pralay Maiti, ACS Applied Polymer Materials 3 (4), 2005-2017 (2021)
  12. Utilization of ABS from plastic waste through single-step reactive extrusion of LDPE/ABS blends of improved properties, Dipti Saxena and Pralay Maiti Polymer 221, 123626 (2021)
  13. Performance simulation of polymer-based nanoparticle and void dispersed photonic structures for radiative cooling, Jay Prakash Bijarniya, Jahar Sarkar and Pralay Maiti , Scientific Reports  11, 893 (2021) 
  14. RAFT mediated bioconjugated amphiphilic graft-block copolymer using dextran, poly(NIPAAm) and poly(vinyl acetate), Puja Das Karmakar, Aparna Shukla, Pralay Maiti, Soumit Chatterjee and Sagar Pal , Journal of Applied Polymer Science 138:50381, 1-14 (2021)
  15. Injectable hydrogels of newly designed brush biopolymers as sustained drug delivery vehicle for melanoma treatment, Aparna Shukla, Akhand Pratap Singh and Pralay Maiti, Signal Transduction and Targeted Therapy 6:63 1-14 (2021)
  16. Synthesis of ABA-type double hydrophilic amphiphilic PU-based block copolymers of poly(N-Vinylpyrrolidone) and poly(N-isopropylacrylamide) via click chemistry Niraj Kumar Vishwakarma, Vijay Kumar Patel, Payel Mitra, K Ramesh, Kheyanath Mitra, Sambhav Vishwakarma, Krishnendu Acharya, Nira Misra, Pralay Maiti, Biswajit Ray, Journal of Macromolecular Science, Part A 58(3), 192-205 (2021)
  17. Defect reconstructions in graphene for excellent broadband absorption properties with enhanced bandwidth ,Rajarshi Bhattacharyya, Vivek Kumar Singh, Somak Bhattacharyya, Pralay Maiti, Santanu Das, Applied Surface Science 537, 147840 (2021)
  18. Study of the Fluorescence based Applications of Water Soluble (N, P) Doped Carbon Dots Synthesized via Microwave Assisted Green Pyrolysis , Rajshree Singh, Shikha Singh, Sudipta Senapati, Kheyanath Mitra, Jaydeep Singh, Susanta KS Gupta, Nira Misra, Pralay Maiti, Biswajit Ray , Nanoscience & Nanotechnology-Asia 10(6), 827-839 (2020)
  19. Functionalized thermoplastic polyurethane gel electrolytes for cosensitized TiO2/CdS/CdSe photoanode solar cell with high efficiency
    Ravi Prakash and Pralay Maiti  Energy & Fuels 34(12), 16847–16857 (2020)
  20. Electrochemical transformation of Prussian blue analogues into ultrathin layered double hydroxide nanosheets for water splitting ,  Baghendra Singh, Om Prakash, Pralay Maiti, Prashanth Menezes, Arindam Indra, Chemical Communications 56, 15036-15039 (2020)
  21. Biocompatible fluorescent probe for detecting mitochondrial alkaline phosphatase activity in live cells ,Sabina Khatun, Shayeri Biswas, Arun Kumar Mahanta, Manu M Joseph, Murukan S Vidyalekshmi, Arup Podder, Pralay Maiti, Kaustabh Kumar Maiti, Sankarprasad Bhuniya, Journal of Photochemistry and Photobiology B: Biology 212, 112043 (2020)
  22. Defect reconstruction in graphene for excellent broadband absorption properties with enhanced bandwidth Rajarshi Bhattacharyya, Vivek Kumar Singh, Somak Bhattacharyya, Pralay Maiti , and Santanu Das, Applied Surface Science 537, 147840 (2020)
  23. Review on passive daytime radiative cooling: Fundamentals, recent researches, challenges and opportunities ,Jay Prakash Bijarniya, Jahar Sarkar, and Pralay Maiti, Renewable and Sustainable Energy Reviews 133, 110263 (2020)
  24. Sulfonated graphene-modified electrodes for enhanced capacitive performance and improved electro-oxidation of hydrogen peroxideSoumili Daripa, Vivek Kumar Singh, Om Prakash, Pralay Maiti, Biplab Kumar Kuila, Santanu Das ,Nano-Structures & Nano-Objects 24, 100531 (2020)
  25. Environmental effect on the performance of passive daytime photonic radiative cooling and building energy-saving potential,Jay Prakash Bijarniya, Jahar Sarkar, and Pralay Maiti, Journal of Cleaner Production 274, 123119 (2020)
  26. Gold Nanoparticle Promoted Formation and Biological Properties of Injectable Hydrogels, Bhingaradiya Nutan, Arvind K Singh Chandel, Arpan Biswas, Avinash Kumar, Anshul Yadav, Pralay Maiti, Suresh K Jewrajka, Biomacromolecules 21(9), 3782–3794 (2020)
  27. Synthesis and characterization of novel amphiphilic biocompatible block-copolymers of poly (N-isopropylacrylamide)-b-poly (l-phenylalanine methyl ester) by RAFT polymerization, Chandra Sekhar Biswas, Arpan Biswas, Massimillano Galluzzi, Mehdihasan I Shekh, Qiao Wang, Biswajit Ray, Pralay Maiti, Florian J Stadler, Polymer 203, 122760 (2020)
  28. Electrochemical Transformation of Metal Organic Framework into Ultrathin Metal Hydroxide-(oxy)hydroxide Nanosheets for Alkaline Water Oxidation                                          Baghendra Singh, Arindam Indra, Om Prakash and Pralay Maiti, ACS Applied Nano Materials  3(7), 6693–6701 (2020)
  29. Drug Delivery Vehicles and Their Efficiency towards Cancer Treatment, Pralay Maiti (invited Editorial article) Nanomedicine 15(17), 1637-1640 (2020)
  30. Polymer Bio-waste Hybrid for Enhanced Piezoelectric Energy Harvesting, Anupama Gaur, Shivam Tiwari, Chandan Kumar and Pralay Maiti,                                                            ACS Applied Electronic Materials 2(5), 1426–1432 (2020)
  31. A flexible, lead free nanogenerator using poly (vinylidene fluoride) nanocomposite, Anupama Gaur, Shivam Tiwari, Chandan Kumar and Pralay Maiti,                                            Energy & Fuels 34(5), 6239–6244 (2020)
  32. Fabrication of Conducting Nanochannels using Accelerator for Fuel cell Membrane and Removal of Radionuclides: Role of Nanoparticles,Om Prakash, Amal M. Mhatre, Rahul Tripathi, Ashok K. Pandey, Pravesh K. Yadav, Saif Khan, and Pralay Maiti ,ACS Applied Materials & Interfaces 12, 17628−17640 (2020)
  33. Electrospun Hybrid Nanofibers of Poly(vinylidene fluoride) and Functionalized Graphene Oxide as Piezoelectric Energy Harvester, Shivam Tiwari, Anupama Gaur, Chandan Kumar,Pralay Maiti, Sustainable Energy & Fuels 4(5), 2469-2479 (2020)
  34. Bio-waste orange peel and polymer hybrid for efficient energy harvesting ,Anupama Gaur, Shivam Tiwari, Chandan Kumar, Pralay Maiti, Energy Reports 6, 490–496 (2020)
  35. PVDF-PZT nanohybrid based nanogenerator for energy harvesting applications,Shivaji H. Wankhade, Shivam Tiwari, Anupama Gaur and Pralay Maiti,Energy Reports 6, 358–364 (2020)
  36. Potency of nanolay on Structural, Mechanical and Gas Barrier Properties of Poly(ethylene terephthalate) Nanohybrid, Dipti Saxena, Karun K. Jana, Narendren Soundararajan, Vimal Katiyar, Dipak Rana and Pralay Maiti, Journal of Polymer Research 27:35, 1-9 (2020)
  37. Functionalized Poly vinyl chloride/Layered Double Hydroxide Nanocomposites and its thermal and mechanical properties, Monika Singh, Divya Somvanshi, Rajesh Kumar Singh, Arun Kumar Mahanta, Pralay Maiti, Nira Misra and Pradip Paik ,Journal of Applied Polymer Science 137, 48894 (2020)
  38. Structural, Mechanical and Gas Barrier Properties of Poly(ethylene terephthalate) Nanohybrid using Nanotal ,Dipti Saxena, Narendren Soundararajan, Vimal Katiyar, Dipak Rana and Pralay Maiti, Journal of Applied Polymer Science 137, 48607 (2020)
  39. Photosensitization Ability of 1,7-Phenanthroline Based bis-BODIPYs: Perplexing Role of Intramolecular Rotation on Photophysical Properties. Vishwa Deepak Singh, Roop Shikha Singh, Bhupendra Kumar Dwivedi, Sujay Mukhopadhyay, Aparna  Shukla, Pralay Maiti and Daya Shankar Pandey      Journal of Physical Chemistry C 123, 30623−30632 (2019)
  40. Mechanical and wear behaviour of poly (vinylidene fluoride)/clay nanocomposite Anupama Gaur, Dipak Rana and Pralay Maiti  Journal of Materials Research and Technology 8(6), 5874–5881 (2019)
  41. Injectable hydrogel through hydrophobic grafting on chitosan for controlled drug delivery Arun K. Mahanta and Pralay Maiti ACS Applied Bio Materials 2(12), 5415-5426 (2019)
  42. Improvement of Mechanical and Structural Properties of Poly(ethylene terephthalate) Nanohybrid  Dipti Saxena, Dipak Rana, E. Bhoje Gowd and Pralay Maiti SN Applied Sciences 1:1363 (2019)
  43. Nanohybrid Scaffold of Chitosan and Functionalized Graphene Oxide for Controlled Drug Delivery and Bone Regeneration ,Arun K. Mahanta, Dinesh Patel, Pralay Maiti  ACS Biomaterials Science & Engineering  5, 5139-5149 (2019)
  44. Structural, Mechanical and Gas Barrier Properties of Poly(ethylene terephthalate) Nanohybrid using Nanotalc ,Dipti Saxena, Narendren Soundararajan, Vimal Katiyar, Dipak Rana and Pralay Maiti Journal of Applied Polymer Science 137, 48607-48618 (2019)
  45. Layered Double Hydroxide Nanoparticles for Efficient Gene Delivery for Cancer Treatment ,Sudipta Senapati, Tanmoy Sarkar, Parimal Das, Pralay Maiti Bioconjugate Chemistry 30, 2544−2554 (2019)
  46. Targeted therapy in chronic diseases using nanomaterial-baseddrug delivery vehicles ,Akhand Pratap Singh, Arpan Biswas, Aparna Shukla and Pralay Maiti ,Signal Transduction and Targeted Therapy 4:33 1-21 (2019)
  47. Graphene oxide-ferrite hybrid framework as enhanced broadband absorption in gigahertz frequencies,   Rajarshi Bhattacharyya, Om Prakash, Somnath Roy, Akhilendra Pratap Singh, Tapas Kumar  ,Bhattacharya, Pralay Maiti, Somak Bhattacharyya and Santanu Das,Scientific Reports 9:12111 (2019).
  48. Tunable shape memory behavior of polymer with surface modification of nanoparticles, Arpan Biswas, Vinod K. Aswal and Pralay Maiti Journal of Colloid and Interface Science 556, 147-158 (2019)
  49. Biobased Piezoelectric Nanogenerator for Mechanical Energy Harvesting using Nanohybrid of Poly (vinylidene fluoride), Anupama Gaur, Shibham Tiwari, Chandan Kumar, and Pralay Maiti Nanoscale Advances 1, 3200–3211 (2019)
  50. Vertically aligned zinc oxide nanosheet for high-performance photocatalysis of water pollutants, Abesh Banerjee, Sayan Chattyopadhyay, Avirup Kundu, Rajendra K Sharma, Pralay Maiti, Santanu Das ,Ceramics International 45, 16821–16828 (2019)
  51. Biomaterials for interfacing cell imaging and drug delivery – An Overview ,Arpan Biswas, Aparna Shukla and Pralay Maiti Langmuir 35, 12285−12305 (2019) 
  52. Highly selective fluorescence ‘turn off’ sensing of picric acid and efficient cell labelling by water soluble luminescent anthracenebridged poly(N-vinyl pyrrolidone) ,Rajshree Singh, Kheyanath Mitra, Shikha Singh, Sudipta Senapati, Vijay K Patel, Sambhav Vishwakarma, Archana Kumari, Jaydeep Singh, Susanta K. Sen Gupta, Nira Misra, Pralay Maiti, Biswajit Ray ,Analyst 144, 3620–3634 (2019)
  53. Synthesis of exchange coupled nanoflowers for efficient magnetic hyperthermia ,S.K. Shaw, A. Biswas, A. Gangwar, P. Maiti, C.L. Prajapat, Sher Singh Meena, N.K. Prasad ,Journal of Magnetism and Magnetic Materials 484, 437–444 (2019)
  54. Fluorescent Functionalized Graphene Oxide for Selective Labeling of Tumor Cells ,Sudipta Senapati, Dinesh K. Patel, Biswajit Ray and Pralay Maiti ,Journal of Biomedical Materials Research Part A 107A, 1917–1924 (2019)
  55. Third Generation Cyclodextrin Graft with Polyurethane embedded in Hydrogel for Sustained Drug Release: Complete Shrinkage of Melanoma, Aparna Shukla, Akhand P. Singh, Tarkeshwar Dubey, Siva Hemalatha, and Pralay Maiti , ACS Applied Bio Materials 2, 1762-1771 (2019)
  56. Effect of penetration enhancers and amorphization on transdermal permeation flux of raloxifene-encapsulated solid lipid nanoparticles: an ex vivo study on human skin, Krishna Kumar Patel, Shilpkala Gade, Md. Meraj Anjum, Sanjay Kumar Singh, Pralay Maiti, Ashish Kumar Agrawal, Sanjay Singh ,Applied Nanoscience 9(6), 1383–1394 (2019)
  57. Fabrication of Low Cost Functionalized Poly(vinylidene fluoride) Nanohybrid Membrane for Superior Fuel Cell ,Om Prakash, Karun K Jana, Murli Manohar, Vinod K. Shahi, Saif A. Khan, Devesh Avasthi, Pralay Maiti ,Sustainable Energy & Fuels 3, 1269–1282 (2019)
  58. Health benefits of resveratrol: Evidence from clinical studies, Akhand Pratap Singh, Rachna Singh, Sumit Singh Verma, Vipin Rai, Catherine H. Kaschula, Pralay Maiti, Subash Chandra Gupta ,Medicinal Research Review 39, 1851-1891 (2019)
  59. Enhanced piezoelectric response in nanoclay induced electrospun PVDF nanofibers for energy harvesting,Shivam Tiwari, Anupama Gaur, Chandan Kumar, Pralay Maiti  Energy 171, 485-492 (2019)
  60. Control drug delivery using nanosheet embedded electrospun fiber for efficient tumor treatment ,Sunil Kumar, Akhand Pratap Singh, Sudipta Senapati, Pralay Maiti,  ACS Applied Bio Materials 2, 884−894 (2019)
  61. Efficacy of Polyurethane Graft on Cyclodextrin to Control Drug Release for Tumor Treatment, Aparna Shukla, Akhand Pratap Singh, Biswajit Ray, Vinod Aswal, Amrita G. Kar, Pralay Maiti Journal of Colloid and Interface Science 534, 215-227 (2019)
  62. Mg0.5Zn0.5Fe2O4-polyurethane thin nanocomposite coating as broadband microwave absorber,   Rajarshi Bhattacharyya, Somnath Roy, Om Prakash, Akhilendra Pratap Singh, Tapas Kumar Bhattacharya, Pralay Maiti, Somak Bhattacharyya, Santanu Das SN Applied Sciences 1:38, (2019)
  63. Bio-waste polymer hybrid as induced piezoelectric material with high energy harvesting efficiency,  Chandan Kumar, Anupama Gaur, Shivam Tiwari, Arpan Biswas, Sanjay Kumar Rai, Pralay MaitiComposites Communications 11, 56–61 (2019)
  64. Grafted cyclodextrin as carrier for control drug delivery and efficient cell killing,  Aparna Shukla, Biswajit Ray, Pralay Maiti Journal of Biomedical Materials Research Part A 107A, 434–444 (2019)
  65. Nanoparticle Induced Controlled Drug Delivery using Chitosan based Hydrogel and Scaffold : Application to Bone Regeneration,  Arun Kumar Mahanta, Sudipta Senapati, Pankaj Paliwal, Sairam Krishnamurthy, Siva Hemalatha and Pralay Maiti Molecular Pharmaceutics (2018)
  66. Water Soluble Fluorescent Graphene Nanodots , Shikha Singh, Kheyanath Mitra, Sudipta Senapati, Rajshree Singh, Yajnaseni Biswas, Susanta K. Sen  Gupta, Nira Misra, Tarun K. Mandal, Pralay Maiti, Biswajit Ray ChemNanoMat 4, 1177–1188 (2018)
  67. Effect of Particle Size on the Performance of TiO2 Based Dye‐Sensitized Solar Cells, Ishwar Chandra Maurya, Sudipta Senapati, Shalini Singh, Pankaj Srivastava, Pralay Maiti,  Lal Bahadur  ChemistrySelect 3, 9872 –988 (2018)
  68. Functionalized Thermoplast Polyurethane as Hole Conductor for Quantum Dot Sensitized Solar Cell,Sunil Kumar, Ishwar Maurya, Om Prakash, Pankaj Srivastava, Santanu Das and Pralay Maiti, ACS Applied Energy Materials 1(9), 4641–4650 (2018)
  69. Functionalized poly(vinylidene fluoride-co-hexafluoro propylene) membrane for fuel cell ,Om Prakash, Karun K. Jana, Rishabh Jain, Prakash Shah, Murli Manohar, Vinod K. Shahi, Pralay Maiti, Polymer 151, 261-268 (2018)
  70. Sustained release of herbal drugs using biodegradable scaffold for faster wound healing and better patient compliance, Arpan Biswas, Manori Amarajeewa, Sudipta Senapati, Manoranjan Sahu, Pralay Maiti , Nanomedicine: Nanotechnology, Biology and Medicine 14, 2131-2141 (2018)
  71. Efficient Energy Harvesting using Processed Poly(vinylidene fluoride) Nanogenerator, Anupama Gaur, Chandan Kumar, Shivam Tiwari and Pralay Maiti, ACS Applied Energy Materials 1, 3019–3024 (2018)
  72. A ‘turn-on’ Fluorescent Probe for Lysosomal Phosphatase: A Comparative Study for Labeling of Cancer Cells ,Arup Podder, Sudipta Senapati, Pralay Maiti, Devaraj Kamalraj, Syed S Jaffer, Sabina Khatun and Sankarprasad Bhuniya, Journal of Materials Chemistry B 6, 4514-4521 (2018)
  73. Nanostructure Controlled Shape Memory Effect in Polyurethanes ,Arpan Biswas, Vinod Aswal, Biswajit Ray, Pralay Maiti ,Journal of Physical Chemistry C 122, 11167−11176 (2018)
  74. Biodegradable toughened nanohybrid shape memory polymer for smart biomedical applications, Arpan Biswas, Akhand Pratap Singh, Dipak Rana, Vinod K. Aswal and Pralay Maiti, Nanoscale 10, 9917–9934 (2018)
  75. Controlled drug delivery vehicles for cancer treatment and their performance, Sudipta Senapati, Arun Kumar Mahanta, Sunil Kumar and Pralay Maiti, Signal Transduction and Targeted Therapy 3:7, 1-19 (2018)
  76. Engineered Cellular Uptake and Controlled Drug Delivery Using Two Dimensional Nanoparticle and Polymer for Cancer Treatment, Sudipta Senapati, Rashmi Shukla, Yamini B. Tripathi, Arun Mahanta, Dipak Rana and Maiti, Pralay, Molecular Pharmaceutics 15(2), 679–694 (2018) 
  77. Poly(vinylidene fluoride-co-chlorotrifluoro ethylene) Nanohybrid Membrane for Fuel Cell, Karun Kumar Jana, Om Prakash, Vonid Shahi, Devesh Avasthi and Pralay Maiti, ACS Omega 3(1), 917–928 (2018)
  78. Synthesis m-cresol with β-cyclodextrin, Koushik Majhi, Rijia Khatun, Sourav Jana, Alakananda Hajra, Aparna Shukla, Pralay Maiti, Arka Dey, Partha Pratim Ray, Subrata Sinha, Journal of Inclusion Phenomena and Macrocyclic Chemistry 90(1-2), 61–73 (2018)
  79. Colorimetric detection of hydrogen peroxide and glucose using brominated graphene, Shikha Singh, Kheyanath Mitra, Rajshree Singh, Archana Kumari, Susanta Kumar Sen Gupta, Nira Misra, Pralay Maiti, Biswajit Ray, Analytical Methods 9(47), 6675-6681 (2017)
  80. Structural and Dielectric Properties of Lanthanum Doped CaCu 3 Ti 4 O 12 for Capacitor Application, Anshuman Srivastava, Om Parkash, Devendra Kumar and Pralay Maiti, American Journal of Materials Synthesis and Processing 2 (6), 90-93 (2017)
  81. Functionalized graphene tagged polyurethanes for corrosion inhibitor and sustained drug delivery, Dinesh K. Patel, Sudipta Senapati, Punita Mourya, Madan M. Singh, Vinod K. Aswal, Biswajit Ray and Pralay Maiti, ACS Biomaterials Science & Engineering 3 (12), 3351–3363 (2017)
  82. Piezo devices using poly(vinylidene fluoride)/reduced graphene oxide hybrid for energy harvesting, Chandan Kumar, Anupama Gaur, Sanjay Kumar Rai and Pralay Maiti, Nano-Structures & Nano-Objects 12, 174–181 (2017)
  83. Biological and analytical techniques used for detection of polyaromatic hydrocarbons, Sunil Kumar, Sangeeta Negi and Pralay Maiti, Environmental Science and Pollution Research 24 (33), 25810-25827 (2017)
  84. Polyurethane-Chitosan Brush as Injectable Hydrogel for Controlled Drug Delivery and Tissue Engineering, Arun K. Mahanta, Sudipta Senapati and Pralay Maiti, Polymer Chemistry 8 (40), 6233-6249 (2017)
  85. Induced Piezoelectricity in Poly(vinylidene fluoride) Hybrid as Efficient Energy Harvester, Anupama Gaur, Chandan Kumar, Rahul Shukla and Pralay Maiti, ChemistrySelect 2, 8278 – 8287 (2017)
  86. New Generation Fuel Cell Membrane Using Swift Heavy Ions, Karun K. Jana, Vimal K. Tiwari, Devesh Avasthi, Tapan Paine and Pralay Maiti, ChemistrySelect 2, 6413 – 6437 (2017)
  87. Osteoconductive Amine Functionalized Graphene-Poly(methyl methacrylate) Bone Cement Composite with Controlled Exothermic Polymerization, Rakesh Sharma, Govinda Kapusetti, Sayali Y Bhong, Partha Roy, Santosh Kumar Singh, Shikha Singh, Biswajit Ray, Pralay Maiti, Nira Misra, Bioconjugate Chemistry 28 (9), 2254–2265 (2017)
  88. Effect of Nanoparticle on the Mechanical and Gas Barrier Properties of Thermoplastic Polyurethane,Shruti Pandey; Karun Jana; Vinod Aswal; Dipak Rana and Pralay Maiti;,Applied Clay Science 146, 468–474 (2017)
  89. Controlled drug release through regulated biodegradation of poly(lactic acid) using inorganic salts, Sunil Kumar, Shikha Singh, Sudipta Senapati, Akhand Pratap Singh, Biswajit Ray, Pralay Maiti, International Journal of Biological Macromolecules 104, 487–497 (2017)
  90. Tailored Chemical Properties of 4 arm star shaped poly (D, L-Lactide) as Cell Adhesive Three-Dimensional Scaffolds, Chelladurai Karthikeyan Balavigneswaran, Sanjeev Kumar Mahto, Subia Bano, Arumugam Prabhakar, Kheyanath Mitra, Vivek Rao, Munia Ganguli, Biswajit Ray, Pralay Maiti, Nira Misra, Bioconjugate Chemistry 28, 1236−1250 (2017)
  91. Novel Shape Memory behaviour in IPDI based Polyurethanes: Influence of nanoparticle, Satyam Srivastava, Arpan Biswas, Sudipta Senapati, Biswajit Ray, Dipak Rana, Vinod K. Aswal and Pralay Maiti, Polymer 110, 95-104 (2017)
  92. Brominated Graphene as Mimetic Peroxidase for Sulfide Ion Recognition, Shikha Singh, Kheyanath Mitra, Aparna Shukla, Rajshree Singh, Ravi Kumar Gundampati, Nira Misra, Pralay Maiti and Biswajit Ray,Analytical Chemistry 89, 783−791 (2017)
  93. Superior Biomaterials using diamine modified graphene grafted polyurethane, Dinesh K. Patel, Vivek Gupta, Ashish Dwivedi, Sanjeev K. Pandey, Vinod K. Aswal, Dipak Rana,and Pralay Maiti, Polymer 106, 109-119 (2016)
  94. Biodegradable poly(e-caprolactone) as controlled drug delivery vehicle of vancomycin for the treatment of MRSA infection, Alok Rai, Sudipta Senapati, Shyam K. Saraf and Pralay Maiti, Journal of Materials Chemistry B: 4, 5151 – 5160 (2016)
  95. Nanoclay templated poly(vinylidene fluoride) gels, P. Jaya Prakash Yadav, Vinod K. Aswal and Pralay Maiti, Macromolecular Symposia 369, 43-48 (2016)
  96. Reversible Bidirectional Shape Memory Effect in Polyurethanes through Molecular Flipping, Arpan Biswas, Vinod K. Aswal, P.U. Sastry, Dipak Rana and Pralay Maiti, Macromolecules 49, 4889 − 4897 (2016)
  97. Controlled Biodegradation of Polymers Using Nanoparticles and Their Applications, Sunil Kumar and Pralay Maiti, RSC Advances 6, 67449 – 67480 (2016)
  98. Graphene as chain extender of polyurethanes for biomedical applications, Dinesh K. Patel, Rajesh K. Singh, Santosh K. Singh, Vinod K. Aswal, Dipak Rana, Biswajit Ray and Pralay Maiti, RSC Advances 6, 58628 – 58640 (2016)
  99. Processing and nanoclay induced piezoelectricity in poly(vinylidene fluoride-co-hexafluoro propylene) nanohybrid for device application, Anupama Gaur, Rahul Shukla, Kumar Brajesh, Arkadeb Pal, Sandeep Chatterji, Rajeev Ranjan and Pralay Maiti, Polymer 97, 362–369 (2016)
  100. Controlled release of drug and better bioavailability using poly(lactic acid-co-glycolic acid) nanoparticles, Sanjeev K. Pandey, Dinesh K. Patel, Akhilendra K. Maurya, Ravi Thakur, Durga P. Mishra, Manjula Vinayak, Chandana Haldar and Pralay Maiti, International Journal of Biological Macromolecules 89, 99–110 (2016)
  101. Effect of isotacticity of linear poly(N-isopropylacrylamide) on its gelation in benzyl alcohol, Chandra Sekhar Biswas, Kheyanath Mitra, Shikha Singh, Dinesh K Patel, Biswajit Maiti, Pralay Maiti and Biawajit Ray, Journal of Chemical Sciences 128 (6), 941–950 (2016)
  102. Layered Double Hydroxides as Effective Carrier for Anticancer Drugs and Tailoring of Release Rate through Interlayer Anions, Sudipta Senapati, Ravi Thakur, Shiv P. Verma, Shivali Duggal, Durga P. Mishra, Parimal Das, T. Shripathi, Mohan Kumar, Dipak Rana, and Pralay Maiti, Journal of Controlled Release 224, 186–198 (2016)
  103. Nanoclay and Swift Heavy Ions Induced Piezoelectric and Conducting Nanochannel based Polymeric Membrane for Fuel Cell, Karun Kumar Jana, Anshuman Srivastava, Om Parkash, Devesh K. Avasthi, Dipak Rana, Vinod K.Shahi and Pralay Maiti, Journal of Power Sources 301, 338–347 (2016)          
  104. Understanding the Controlled Biodegradation of Polymers using Nanoclays, Sunil Kumar and Pralay Maiti, Polymer 76, 25–33 (2015)
  105. Poly (vinylidene fluoride)/CaCu3Ti4O12 and La doped CaCu3Ti 4O12 composites with improved dielectric and mechanical properties, Anshuman Srivastava, Karun K. Jana, Pralay Maiti, Devendra Kumar, Om Parkash, Materials Research Bulletin 70, 735–742 (2015)
  106. Polyurethane grafted chitosan as new biomaterials for controlled drug delivery, Arun Kumar Mahanta, Vikas Mittal, Nitesh Singh, Debabrata Dash, Sudip Malik, Mohan Kumar and Pralay Maiti, Macromolecules 48, 2654–2666 (2015)
  107. Poly(vinylidene fluoride-co-hexafluoro propylene) nanohybrid membrane using swift heavy ions irradiation for fuel cell application, Karun Kumar Jana, Amit K. Thakur, Vinod K. Shahi, Devesh K. Avasthi, Dipak Rana, and Pralay Maiti, Journal of Materials Chemistry A 3, 10413–10424 (2015) 
  108. Graphene induced self-assembly in polyurethanes for biomedical applications, Dinesh K. Patel, Dipak Rana, Vinod  K. Aswal, Swati Srivastava, Partha Roy, Pralay Maiti, Polymer 65, 183–192  (2015)
  109. Study of the effect of isotacticity on some physical properties of poly (N-isopropylacrylamide), Chandra Sekhar Biswas, Kheyanath Mitra, Shikha Singh, Kalyan Ramesh, Nira Misra, Biswajit Maiti, Amiya Kumar Panda, Pralay Maiti, Masami Kamigaito, Yoshio Okamoto, Biswajit Ray, Colloid and Polymer Science 293, 1749–1757 (2015)
  110. Anti-cancer evaluation of Quercetin embedded PLA nanoparticles synthesized by emulsified nanoprecipitation, Sanjeev K. Pandey, Dinesh K. Patel, Ravi Thakur, Durga P. Mishra, Pralay Maiti, Chandana Haldar, International Journal of Biological Macromolecules 75, 521–529 (2015),
  111. Synthesis and in-vitro evaluation of Melatonin entrapped PLA nanoparticles: An oxidative stress and T-cell response using Golden hamster, Sanjeev Pnadey, Chandana Haldar, Dipanshu. K. Vishwas and Pralay Maiti, Journal of Biomedical Materials Research: Part A. 3034–3044, 103  (2015)
  112. Optical studies of poly(9,9-DI-(2-ethylhexyl)-9H-fluorene-2,7-vinylene) and its nanocomposites, Sandip Layek, Mihir Ghosh, Karuka Siddarth Reddy, Sudipta Senapati, Pralay Maiti and Subrata Sinha, Journal of Applied Spectroscopy 82(5) 805-1 – 805-7  (2015)
  113. Tadpole-shaped β-Cyclodextrin-tagged Poly (N-Vinylpyrrolidone): Synthesis, Characterization and Studies of Its Complexation with Phenolphthalein and Anti Tumor Activities, Biswajit Ray, Niraj K Vishwakarma, Vijay K Patel, Sumit Hira, Kalyan Ramesh, Prateek Srivastava, Kheyanath Maitra, Shikha Singh, Dipankar Chattopadhyay, Pralay Maiti, Nira Misra, Partha Pratim Manna, RSC Advances 5(20), 15547–15558 (2015)
  114. Functionalized Poly(vinylidene fluoride) Nanohybrid for Superior Fuel Cell Membrane, Karun Kumar Jana, Chumki Charan, Vinod K. Shahi, Kheyanath Mitra, Biswajit Ray, Dipak Rana, and Pralay Maiti, Journal of Membrane Science 481, 124–136 (2015)
  115. Investigations on Structural, Mechanical, and Dielectric Properties of PVDF/Ceramic Composites, Anshuman Srivastava, Karun Kumar Jana, Pralay Maiti, Devendra Kumar and Om Parkash, Journal of Engineering 2015, Article ID 205490, 9 pages (2015)
  116. Therapeutic efficacy and toxicity of tamoxifen loaded PLA nanoparticles for breast cancer, Sanjeev K. Pandey, Somenath Ghosh, Pralay Maiti, Chandana Haldar, International Journal of Biological Macromolecules 72, 309–319 (2015)
  117. Electron beam induced piezoelectric phase in PVDF nanohybrid : The effect of at the molecular level, Vimal K. Tiwari, Madhab C. Rath, Sisir K. Sarkar, Vijay K. Patel, Biswajit Ray, Biswajit Maiti and Pralay Maiti, Polymer International 64, 212–221 (2015)
  118. Mechanical and dielectric behaviour of CaCu3Ti4O12 and Nb doped CaCu3Ti4O12 Poly(vinylidene fluoride) composites, Anshuman Srivastava, Karun Kumar Jana, Pralay Maiti, Devendra Kumar and Om Parkash, Journal of Composites 2014, Article ID 769379, 9 pages, (2014)
  119. Synthesis, characterization, and solution behavior of well-defined double hydrophilic linear amphiphilic poly(N-isopropylacrylamide)-b-poly (ε-caprolactone)-b-poly(N-isopropylacrylamide) triblock copolymers, Avnish Kumar Mishra, Niraj Kumar Vishwakarma, Vijay Kumar Patel, Chandra Sekhar Biswas, Tapas Kumar Paira, Tarun Kumar Mandal,  Pralay Maiti, Biswajit Ray, Colloid and Polymer Science 292(6), 1405-1418 (2014)
  120. Bone cement based nanohybrid as super biomaterial for bone healing, Govinda Kapusetti, Nira Misra, Vakil Singh, Swati Srivastava, Partha Roy, Kausik Dana and Pralay Maiti, Journal of Materials Chemistry B 2(25), 3984-3997 (2014)
  121. Mechanical and dielectric properties of CaCu3Ti4O12 and La doped CaCu3Ti4O12 Poly(vinylidene fluoride) composites, Anshuman Srivastava, Pralay Maiti, Devendra Kumar and Om Parkash, Composites Science and Technology 93, 83-89 (2014)
  122. Self-assembled Aliphatic Chain Extended Polyurethane Nanobiohybrids: Emerging Hemocompatible Biomaterials for Sustained Drug Delivery, Abhinay Mishra, Sunil K. Singh, Debabrata Dash, Vinod K. Aswal, Biswajit Maiti­, Manjusri Misra and Pralay Maiti, Acta Biomaterialia 10, 2133–2146 (2014),
  123. Florouracil loaded poly(lactic acid)-poly(caprolactone) hybrid scaffold: potential chemotherapeutic implant, Kamal K. Gupta, Namrata Pal, Pradeep K. Mishra, Pradeep Srivastava, Sujata Mohanty, Pralay Maiti, Journal of Biomedical Materials Research: Part A 102A, 2600–2612 (2014)
  124. Nanoparticle and Process Induced Super Toughened Piezoelectric Hybrid Materials: The Effect of Stretching on Filled System, Vimal Tiwari, Amit Prasad, Vaishali Singh, Karun Jana, Manjusri Misra, C. Durga Prasad, Pralay Maiti, Macromolecules 46, 5595−5603 (2013)
  125. CNT Induced β-phase in Polylactide : Unique Crystallization, Biodegradation and Biocompatibility", Narendra K. Singh, Sunil K. Singh, Debabrata Dash, Prasad Gonugunta, Manjusri Misra, Pralay Maiti, Journal of Physical Chemistry C 117, 10163-10174 (2013)
  126. Layered double hydroxide induced advancement in joint prosthesis using bone cement: The effect of metal substitution, Govinda Kapusetti, Raghvendra Raman Mishra, Swati Srivastava, Nira Misra, Vakil Singh, Partha Roy, Santhosh Kumar Singh, Chanchal Chakraborty, Sudip Malik, Pralay Maiti, Journal of Materials Chemistry B 1, 2275-2288 (2013)
  127. Nanochannel Conduction in Piezoelectric Polymeric Membrane using Swift Heavy Ions and Nanoclay, Karun Kumar Jana, Niraj Kumar Vishwakarma, Biswajit Ray, Saif A. Khan, Devesh K. Avasthi, Manjusri Misra and Pralay Maiti, RSC Advances 3, 6147-6159 (2013)
  128. Development of ciprofloxacin hydrochlodire loaded poly(ethylene glycol)/chitosan scaffold as wound dressing, Mukty Sinha, Rathindra M. Banik, Chandana Haldar, Pralay Maiti, Journal of Porous Materials 20, 799-807 (2013)
  129. Synthesis, Characterization, and application of novel Amphiphilic Poly(D- gluconamidoethyl methacrylate)-b-polyurethane-b- poly(D-gluconamidoethyl methacrylate) triblock Copolymers, Niraj Kumar Vishwakarma, Avnish Kumar Mishra, Abhinay Mishra, Tapas Paira, Vijay Kumar Patel, Chandra Sekhar Biswas, Tarun Kumar Mandal, Pralay Maiti and Biswajit Ray, Journal of Applied Polymer Science 128(3), 1369-1380 (2013)
  130. Synthesis of Alkyne-terminated Xanthate RAFT Agents and Their Uses for the Controlled Radical Polymerization of N-Vinylpyrrolidone and the Synthesis of Its Block Copolymer Using Click Chemistry, Vijay Kumar Patel, Niraj Kumar Vishwakarma, Avnish Kumar Mishra, Chandra Sekhar Biswas, Pralay Maiti, Biswajit Ray, Journal of Applied Polymer Science 127(6), 4305-4317 (2013)
  131. Enzymatic Degradation of Polylactide/Layered Silicate Nanocomposites: Effect of Organic Modifiers
    Narendra. K. Singh, Biswa Pratim Das Purkayastha, Muktikanta Panigrahi, Rajeev K. Gautam, Rathindra M. Banik, Pralay Maiti, Journal of Applied Polymer Science 127(4), 2465-2474 (2013)
  132. Hydrothermal in-situ preparation of TiO2 particles onto poly(lactic acid) electrospun nanofibres, Kamal K. Gupta, Pradeep K. Mishra, Pradeep Srivastava, Mayank Gangwar, Gopal Nath, Pralay Maiti, Applied Surface Science 264, 375– 382 (2013)
  133. Swift Heavy Ions Induced Controlled Biodegradation of Poly(e-caprolactone) Nanohybrids, Vimal K. Tiwari, Narendra K. Singh, Devesh K. Avasthi, Manjusri Misra, and Pralay Maiti, Radiation Physics and Chemistry 82, 92–99 (2013)
  134. Synthesis of well-defined amphiphilic poly(D,L-lactide)-b-poly(N- vinylpyrrolidone) block copolymers using ROP and xanthate-mediated -RAFT polymerization, K. Ramesh, Avnish Kumar Mishra, Vijay Kumar Patel, Niraj Kumar Vishwakarma, Chandra Sekhar Biswas, Tapas Kumar Paira, Tarun Kumar Mandal, Pralay Maiti, Nira Misra, Biswajit Ray, Polymer 53, 5743-5753 (2012)
  135. Polycaprolactone composites with TiO2 for Potential Nanobiomaterials: Tunable properties using different phases, Kamal K. Gupta, Akshay Kundan, Pradeep K. Mishra, Pradeep Srivastava, Sujata Mohanty,Narendra K. Singh, Abhinay Mishra, Pralay Maiti, Physical Chemistry Chemical Physics 14, 12844–12853  (2012)
  136. Nanostructure Controlled Anti-Cancer drug delivery using Poly(e-caprolactone) based Nanohybrids, Narendra K. Singh, Sunil K. Singh, Debabrata Dash, Biswa Pratim Das Purkayastha, Jagat K. Roy and Pralay Maiti, Journal of Materials Chemistry 22, 17853-17863 (2012)
  137. Bone cement / layered double hydroxide nanocomposites as potential biomaterials for joint implant, Govinda Kapusetti, Nira Misra, Vakil Singh, R.K. Kushwaha,Pralay Maiti, Journal of Biomedical Materials Research: Part A 100A, 3363–3373 (2012)
  138. Silicon carbide-induced piezoelectric b-phase in poly(vinylidene fluoride) and its properties, Jay Sheth, Devendra Kumar, Vimal K. Tiwari, Pralay Maiti, Journal of Materials Research 27, 1838-1845 (2012)
  139. Nanoparticle Controlled Self-Assembly in Varying Chain Extended Polyurethanes as Potential Nanobiomaterials, Abhinay Mishra, Biswa Pratim Das Purkayastha, Jagat K. Roy, Vinod K. Aswal, and Pralay Maiti, Journal of Physical Chemistry : C  116, 2260-2270 (2012)
  140. Conducting Nano-channels in Induced Piezoelectric Polymeric Matrix Using Swift Heavy Ions and Subsequent Functionalization, Karun Kumar Jana, Biswajit Ray, Devesh K. Avasthi and Pralay Maiti, Journal of Materials Chemistry 22, 3955-3964 (2012)
  141. Nanoparticle Induced Piezoelectric, Super Toughened, Radiation Resistant, Multi-functional Nanohybrids, Vimal K. Tiwari, T. Shripathi, N. P. Lalla and Pralay Maiti, Nanoscale 4, 167-175 (2012)
  142. Tuned Biodegradation using Poly(hydroxybutyrate-co-valerate) Nanobiohybrids: Emerging Biomaterials for Tissue Engineering and Drug Delivery, Narendra K. Singh, Biswa Pratim Das Purkayastha, Jagat K. Roy, Rathindra M. Banik, Prasad    , Gonugunta, Manjusri Misra, and Pralay Maiti, Journal of Materials Chemistry 21, 15919-15927 (2011)
  143. Effects of Tacticity and Molecular Weight of Poly(N-isopropylacrylamide) on Its Glass Transition Temperature, Chandra Sekhar Biswas, Vijay Kumar Patel, Niraj Kumar Vishwakarma, Vimal K. Tiwari, Biswajit  , Maiti, Pralay Maiti, Masami Kamigaito, Yoshio Okamoto, and Biswajit Ray, Macromolecules 44(14), 5822-5824 (2011)
  144. Swift heavy Ion Induced, Vimal K. Tiwari, Devesh K. Avasthi and Pralay Maiti, ACS Applied Materials and Interfaces 3, 1398-1401 (2011)
  145. Highly Efficient Polyurethane Ionomer Corrosion Inhibitor: The Effect of Chain Structure, Sitashree Banerjee, Abhinay Mishra, Madan M. Singh, Biswajit Maiti, Biswajit Ray and Pralay Maiti, RSC Advances 1, 199-210 (2011)
  146. Thermoreversible Gelation of Poly(vinylidene fluoride-co-chlorotrifluoro ethylene): Structure, Morphology, Thermodynamics and Theoretical Prediction, P. Jaya Prakash Yadav, B. Maiti, B. Ghorai, P.U. Sastry; A. Patra, V.K. Aswal, and Pralay Maiti, Macromolecules 44, 3029-3038 (2011)
  147. Aromatic Polyurethanes: The Effect of Hard Segment and Chain Structure on the Properties, Abhinay Mishra and Pralay Maiti, Journal of Polymer Engineering 31, 253-259 (2011)
  148. Toughening of bone cement using nanoparticle : The effect of solvent, Nira Misra, Govinda Kapusetti,  Shilpa Jaiswal and Pralay Maiti, Journal of Applied Polymer Science 121, 1203-1213 (2011)                             
  149. Morphology of Polyurethanes at Various Length Scale: The Influence of Chain Structure, Abhinay Mishra and Pralay Maiti, Journal of Applied Polymer Science 120, 3546-3555 (2011)
  150. Effects of Nanoclay and Polyurethanes on Inhibition of Mild Steel Corrosion, Sitashree Banerjee, Abhinay Mishra, Madan M. Singh and Pralay Maiti, Journal of Nanoscience and Nanotechnology 11, 966-978 (2011)
  151. Chiotosan Nanoparticles of 5-Fluorouracil for Ophthalmic Delivery: Characterization, in-Vitro and in-Vivo Study, Ramesh Chand Nagarwal, Paras Nath Singh, Shri Kant, Pralay Maiti, and Jayanta Kumar Pandit, Chemical & Pharmaceutical Bulletin 59(2), 272-278, (2011)
  152. Chitosan Coated PLA Nanoparticles for Ophthalmic Delivery: Characterization, In-Vitro and In-Vivo Study in Rabbit Eye, Ramesh Chand Nagarwal, Paras Nath Singh, Shri Kant, Pralay Maiti, and Jayanta Kumar Pandit, Journal of Biomedical Nanotechnology 6(6), 648-657, (2010)
  153. Tunable Properties of Self-assembled Polyurethane Using Two-Dimensional Nanoparticles: Potential Nano-Biohybrid, Abhinay Mishra, Biswa Pratim Das Purkayastha, Jagat K. Roy, Vinod K. Aswal, and Pralay Maiti, Macromolecules 43(23), 9928-9936 (2010)
  154. Solvent Retention, Thermodynamics, Rheology and Small Angle X-ray Scattering, Thermoreversible Poly(vinylidene fluoride) Gels, P. Jaya Prakash Yadav, A.K. Patra, P.U. Sastry,  Binay K. Ghorai and Pralay Maiti, Journal of Physical Chemistry: B  114(35), 11420-11429 (2010)
  155. Nanoparticles Induced Controlled Biodegradation and its Mechanism in Poly(e-caprolactone), Narendra K. Singh, Biswapratim Das Purkayastha, Jagat K. Roy, Rathindra M. Banik,  Madhu Yashpal, Gajendra Singh, Sudip Malik, and Pralay Maiti, ACS Applied Materials and Interfaces 2(1), 69-81 (2010)
  156. Nanostructure to Microstructure Self-Assembly of Aliphatic Polyurethanes: The Effect on Mechanical Properties, Abhinay Mishra, Vinod K. Aswal, and Pralay Maiti, Journal of Physical Chemistry: B  114(16), 5292-5300 (2010)
  157. Specific interactions in partially miscible Polycarbonate (PC)/Poly (methyl methacrylate) (PMMA) Blend, A K. Singh, R. K Mishra, R. Prakash, Pralay  Maiti, A. K. Singh, D. Pandey, Chemical Physics Letters 486, 32-36 (2010)
  158. Improved Biodegradation and Thermal Properties of Poly(lactic acid)/Layered Silicate Nanocomposites, Muktikanta Panigrahi, Narendra K. Singh, Rajeev K. Gautam, Rathindra M. Banik, Pralay Maiti, Composite Interfaces 17, 143-158 (2010)  
  159. Nanoparticles Induced Biodegradation of Poly(e-caprolactone), Narendra K. Singh, R M. Banik, P.K. Kulriya, D.K. Avasthi, S. Malik, and Pralay Maiti, Nanoscience and Nanotechnology Letters 1(1), 52-56, (2009)            
  160. Radiation Resistant Behavior of Poly(vinylidene fluoride) / Layered Silicate Nanocomposites, Vimal K. Tiwari, Pawan K. Kulriya, Devesh K. Avasthi and Pralay Maiti, ACS Applied Materials and Interfaces 1(2), 311-318, (2009)
  161. Polymeric Nanoparticulate System: A Potential Approach for Ocular Drug delivery, Ramesh C. Nagarwal, Shri Kant, P.N. Singh, Pralay Maiti and J.K. Pandit, Journal of Controlled Release 136, 2-13 (2009)
  162. Poly(Vinylidene Fluoride-co-Hexafluoro Propylene)/Layered Silicate Nanocomposites : TheEffect of Swift Heavy Ion, Vimal K. Tiwari, Pawan K. Kulriya, Devesh K. Avasthi and Pralay Maiti, Journal of Physical Chemistry : B  113 (34), 11632-11641 (2009)
  163. Thermoreversible Gelation of Poly(vinylidene fluoride-co-hexafluoro propylene) in Phthalates, P. Jaya Prakash Yadav, Vinod K. Aswal, P.U. Sastry, A.K. Patra, and Pralay Maiti, Journal of Physical Chemistry : B  113 (41), 13516-13525 (2009)
  164. Biodegradable Nanocomposites of Poly(hydroxybutyrate-co-hydroxyvalerate) : The Effect of Nanoparticles, Pralay Maiti and P. Jaya Prakash Yadav, Journal of Nanoscience and Nanotechnology 8, 1858-1866, (2008)
  165. Thermoreversible Gelation of Poly(Vinylidene Fluoride) in Phthalates : The Influence of Aliphatic Chain Length of Solvents, P. Jaya Prakash Yadav, G. Ghosh, B. Maiti, V. K. Aswal, P. S. Goyal, and Pralay Maiti, Journal of Physical Chemistry : B 112(15), 4594-4603 (2008)
  166. Studies on Ethylene Propylene Diene Rubber and Thermoplastic Polyurethane Blends: The Effect of Maleation, R. Dhamodharan, Pralay Maiti, and Ganga Radhakrishnan,Polymer-Plastics Technology and Engineering 47(11), 1081–1089, (2008)
  167. Study on Blends of Ethylene Propylene Diene Rubber and Thermoplastic Polyurethanes, R. Dhamodharan, Pralay Maiti, and Ganga Radhakrishnan, Polymer-Plastics Technology and Engineering 46, 163–168, (2007)
  168. New Biodegradable Polyhydroxybutyrate/Layered Silicate Nanocomposites, Pralay Maiti, Carl A. Batt and Emmanuel P. Giannelis, Biomacromolecules 8, 3393-3400, (2007)
  169. Novel Polyurethane Gels: The Effect of Structure on Gelation, Pralay Maiti, Ganga Radhakrishnan, Palanisamy Aruna, Goutam Ghosh, Macromolecular Symposia 241, 51 (2006)
  170. Effect of nanoparticle mobility on toughness of polymer nanocomposites,Deepak Shah, Pralay Maiti, David Jiang, Emmanuel P. Giannelis, Advanced Materials –17 (5), 525 (2005)
  171. Nanocomposites and nanofluids, D. Shah, P. Maiti, A. Bourlinos, Q. Zhang, L.A. Archer, E.P.  Giannelis, Polymeric Materials Science and Engineering 92, 257 (2005)
  172. Structural development in cycloolefin copolymers under uniaxial elongational flow, Pralay Maiti and Masami Okamoto, Journal of Applied Polymer Science 91, 3421 (2004)
  173. Dramatic enhancements in toughness of polyvinylidene fluoride nanocomposites via nanoclay-directed crystal structure and morphology, D. Shah, P. Maiti, E. Gunn, D.F. Schmidt, D.D. Jiang, C.A. Batt and E.P. Giannelis, Advanced Materials 16(14), 1173 (2004)
  174. Crystallization controlled by silicate surfaces in Nylon 6-Clay Nanocomposites, Pralay Maiti, Masami Okamoto, Macromolecular Materials and Engineering 288, 440 (2003)
  175. Biodegradable polyester / layered silicate nanocomposites, Pralay Maiti, Carl A. Batt, Emmanuel P. Giannelis, Material Research Society Symposium Proceedings 740, 141 (2003)
  176. Renewable plastics: Synthesis and properties of PHB nanocomposites, Pralay Maiti, Carl A. Batt, Emmanuel P. Giannelis, Polymeric Materials Science and Engineering 88, 58 (2003)
  177. Influence of miscibility on the viscoelasticity, structure and intercalation of oligo-polycaprolactone / layered silicate nanocomposite, Pralay Maiti, Langmuir 19, 5502 (2003)
  178. Effect of organic modifier on the structure of oligo-poly(caprolactone) / layered silicate nanocomposites,Pralay Maiti, Polymer Preprints 44(2), 258 (2003)
  179. Influence of intercalation on the structure, morphology and mechanical properties of polypropylene / clay nanocomposite, P. Maiti, P.H. Nam, M. Okamoto, T. Kotaka, N. Hasegawa, A. Usuki, Polymer Engineering & Science 42, 1864  (2002)
  180. Foam processing and cellular structure of PP/clay nanocomposites, P.H. Nam, P. Maiti, M. Okamoto, T. Kotaka, M. Takada, M. Ohshima, N. Hasegawa, A. Usuki, Polymer Engineering & Science 42, 1907  (2002)  
  181. Influence of crystallization on intercalation, morphology and mechanical properties of polypropylene / clay nanocomposites, P. Maiti, P.H. Nam, M. Okamoto, N. Hasegawa, A. Usuki, Macromolecules 35, 2042  (2002)
  182. New Polylactide–layered silicate nanocomposites 1 : Preparation, characterization and properties, S. Sinha Ray, P. Maiti, M. Okamoto, K. Yamada, K. Ueda, Macromolecules 35, 3104  (2002)
  183. New poly(butylene succinate) / layered silicate nanocomposites. 1: Preparation and mechanical properties, S. Sinha Ray, K. Okamoto, P. Maiti, M. Okamoto, Journal of Nanoscience and Nanotechnology 2, 171 (2002)
  184. New Polylactide/Layered Silicate Nanocomposites : Role of Organoclays, P. Maiti, K. Yamada, M. Okamoto, K. Ueda, K. Okamoto Chemistry of Materials 14, 4654 (2002)
  185. Glass transition temperature of poly(vinylidene fluoride)/poly(methyl acrylate) blends:Influence of aging and chain structure, Pralay Maiti, Asok Dixit and Arun K. Nandi, Journal of Applied Polymer Science 79, 1541 (2001)
  186. Elongational flow birefringence of ethylene-tetracyclododecene copolymer, Pralay Maiti, Masami Okamoto and Tadao Kotaka, Polymer 42, 3939 (2001)
  187. A house of cards structure in polypropylene/clay nanocomposites under elongational flow, Masami Okamoto, Pham Hoai Nam, Pralay Maiti, Tadao Kotaka, Naoki Hasegawa and Arimitsu Usuki, Nano Letters 1, 295 (2001)
  188. Biaxial Flow-Induced Alignment of Silicate Layers in Polypropylene/Clay Nanocomposite Foam, M. Okamoto, P. H. Nam, P. Maiti, T. Kotaka, T. Nakayama, M. Takada, M. Ohshima, A. Usuki, N.Hasegawa and H. Okamoto, Nano Letters 1, 503 (2001)
  189. Flow birefringence and strain-induced hardening of cycloolefin copolymers under elongational flow, Pralay Maiti, Masami Okamoto and Tadao Kotaka, Polymer   42, 9827 (2001)
  190. A Hierarchical structure and properties of intercalated polypropylene/clay nanocomposites, P.H. Nam, P. Maiti, M. Okamoto, T. Kotaka, N. Hasegawa, A. Usuki, Polymer 42, 9633 (2001)
  191. Elongational flow birefringence of cycloolefin copolymers, P. Maiti, M. Okamoto, T. Kotaka, Polymeric Materials Science and Engineering 84, 418 (2001)
  192. Lamellar Thickening in Isotactic Polypropylene with High Tacticity Crystallized at High Temperature,  Pralay Maiti, Masamichi Hikosaka, Koji Yamada, Akihiko Toda, and Fangming Gu, Macromolecules 33, 9069  (2000)
  193. Nucleation and crystallization of isotactic poly(propylene) droplets in an immiscible polystyrene,matrix, M.L. Arnal, A.J. Muller, P. Maiti and M. Hikosaka, Macromolecular Chemistry and Physics 201, 2493  (2000)
  194. Morphology of poly(vinylidene fluoride)/poly(methyl acrylate) blends : Influence of chain structure, Pralay Maiti and Arun K. Nandi, Macromolecular Chemistry and Physics 199, 1479  (1998)
  195. Influence of chain structure on the crystallization mechanism of poly(vinylidenefluoride)/poly(methyl acrylate) blends : Evidence of chain extension due to blending, Pralay Maiti and Arun K. Nandi, Polymer 39, 413 (1998)
  196. Kinetic immiscibility of crystalline polymer/amorphous polymer blends, Arun K. Nandi and Pralay Maiti, Polymer 38, 2171 (1997)
  197. Influence of chain structure on the miscibility of poly(vinylidene fluoride) with poly(methyl acrylate), Pralay Maiti and Arun K. Nandi, Macromolecules 28, 8511 (1995)
  198. On the gelation rates of thermoreversible poly(vinylidene fluoride) gels, Sukumar Mal, Pralay Maiti and Arun K. Nandi, Macromolecules 28, 2371 (1995)
  199. Oxidation of polypropylene using phase-transferred permanganate as oxidant, J. Konar and P. Maiti, Journal of Material Science Letter 13, 197 (1994)
  200. Melting and crystallization behaviour of poly(vinylidene fluoride) samples in its blends with some polyacrylates, poly(vinyl esters) and poly(aryl ether ether ketone),  P. Maiti, J. Chatterjee, D. Rana and A. K. Nandi, Polymer 34, 4273 (1993)
 
 
 Book / Book Chapter:
  1. Reinforced Polymers for Electroactive Devices” in “Reactive and Functional Polymers” Volume 2 ,Anupama Gaur and Pralay Maiti , Publisher: Springer ISBN: 978-3-030-45134-9; Pg. 325-347 (2020)
  2. Emerging bio-applications of two-dimensional nanoheterostructure materials” in “2D Nanoscale Heterostructured Materials: Synthesis, Properties and Applications Sudipta Senapati and Pralay Maiti Publisher: Elsevier ISBN: 978-0-12-817678-8; Pg 243-255 (2020)
  3. “Polymer Composites in Aerospace Applications” in ‘Progress and Prospects in Nanoscience Today’ part of Nanotechnology Science and Technology’ series, Dipti Saxena and Pralay Maiti, Publisher: Nova Science Publishers, Inc., USA, ISBN: 978-1-53617-292-8 Pg 77-105 (2020)
  4. “Biodegradable Polymer-based Nanohybrids for Controlled Drug Delivery and Implant Applications” in ‘Advances in Sustainable Polymers’ Part of the Materials Horizons: From Nature to Nanomaterials book series (MHFNN) Aparna Shukla and Pralay Maiti ; Publisher : Springer, Singapore ISBN: 978-981-32-9803-3 Pg 3-19  (2019)
  5. Polymer Composites for Structural, Device and Biomedical Applications” in Materials Science and Technology ,Anupama Gaur, Aparna Shukla, Dipti Saxena and Pralay Mait, Publisher : Wiley-VCH ISBN: 9783527313952    Pg 1-34  (2019) ,DOI: http://dx.doi.org/10.1002/9783527603978.mst0455
  6. “Dressing Materials Using Herbal Drugs for Better Wound Management” in “Advances in Polymers for Biomedical Applications”,Arpan Biswas, Manoranjan Sahu and Pralay Maiti, Publisher : Nova Science Publishers Inc. ISBN:  9781536136128  (2018) 279-302
  7. Crystal-Melt Phase Change of Food and Biopolymers” in “Glass Transition and Phase Transitions in Food and Biological Materials”   Sudipta Senapati, Dipak Rana and  Pralay Maiti  Publisher : John Wiley & Sons  ISBN: 9781118935729  (2017) 119-139
    Editors: Jasim Ahmed, Yrjo H. Roos and Shafiur Rahman
  8. “Thermal Properties of Food and Biopolymer Using Relaxation Techniques” in “Glass Transition and Phase Transitions in Food and Biological Materials” Arun K. Mahanta, Dipak Rana, Akhil K. Sen and Pralay Maiti Publisher : John Wiley & Sons  ISBN: 9781118935729  (2017) 141-157  Editors: Jasim Ahmed, Yrjo H. Roos and Shafiur Rahman
  9. “Polyurethane nanocomposites of layered clays” in “Polyurethane Polymers : Composites and  Nanocomposites” Dinesh K. Patel, Arun Kumar Mahanta and Pralay Maiti  Publisher: Elsevier   ISBN: 978-0-12-804065-2  (2017) 173-189    Editors: Sabu Thomas, Januscz Datta, Haponiuk Jozef, Arunima R
  10. “Effect of Swift Heavy Ions on Fluoropolymers : New generation Fuel cell” Lap Lambert Academic  Publishing Group, Germany; ISBN: 978-3-659-95909-7 (2016)  Pralay Maiti and Karun Jana
  11. “Plastic Pollution and its Remedies” in “Journal of Science from the publication of Vivekananda College, Kolkata”  Sunil Kumar and Pralay Maiti “Bodhi Bijnan” 03, 21-26, (2016)
  12.  “Nanoparticle Induced Controlled Biodegradation of Polymers” in “Environmental Friendly Biodegradable         Polymers: Present and Future” Pralay Maiti and Sunil Kumar  Publisher: Mallick Book Centre: 43-50,      (2016)Ed: Bidhan C. Samanta and Tithi Mait
  13. “Nanoparticle-induced phenomena in polyurethanes” in ‘Advances in Polyurethane Biomaterials’ Dinesh K. Patel, Arpan Biswas and Pralay Maiti Publisher: Woodhead Publishing–Woodhead Publishing series in Biomaterials: 171-194, (2016) Ed: Stuart L. Cooper and Jianjun Guan
  14. “Chitin and Chitosan Nanocomposites for Tissue Engineering” in “Chitin and Chitosan for Regenerative Medicine” Arun Kumar Mahanta, Pralay Maiti Publisher: Springer – Springer series on Polymer and Composite Materials: 123-149, (2016) Ed: P.K. Dutta
  15. “Nonlinear viscoelasticity of one dimensional filler reinforced elastomer composites and nanocomposites” in “Advances in Polymer Science; Volume: Nonlinear viscoelasticity of rubber composites” Karun K. Jana, Mrinal Patel, Dipak Rana, and Pralay Maiti Advances in Polymer Sciences; Eds:  P. Deepalekshmi, Sabu Thomas Publisher: Springer – Advances in Polymer Science 264: 15–41, (2014)
  16. “Biodegradable polymers for potential delivery systems for therapeutics” in “Advances in Polymer Science; Volume: Multifaceted Development and Applications of Biopolymers towards Biology,    Biomedical and Nanotechnology Sanjeev K. Pandey, Chandana Haldar, Dinesh K. Patel and Pralay Maiti Advances in Polymer Sciences; Eds: P.K. Dutta and Joydeep Dutta Publisher: Springer – Advances in Polymer Science 254: 169–202, (2013
  17. “Polycaprolactone based Nanobiomaterials” in “Biomedical Nanomaterials and Diagnostic Devices”  Narendra K. Singh and Pralay Maiti
     Eds: Ashutosh Tiwari, Murugan Ramalingam, Hisatoshi Kobayashi and Anthony P.F. Turner Publisher: Wiley-Scrivener Publishing LLC. – (2012)
  18. “Self-assembly in Polyurethanes: Effect of Two Dimensional Nanoparticles” in ‘Nanotechnology in Polymers’ Abhinay Mishra and Pralay Maiti  Eds: Vijay K. Thakur and Amar Singh Publisher: Studium Press (USA) – (2012)
  19. “Biodegradable Nanocomposites Based on Poly(hydroxyalkanoates)” in ‘Nanocomposites with Biodegradable Polymers: Synthesis, Properties and Future Perspectives’  Narendra K. Singh and Pralay Maiti Ed: V. Mittal Publisher: Oxford University Press (UK) – (2011)
  20. “Polyamide Nanocomposites” in ‘Polymer Nanocomposite Research Advances’ Pralay Maiti  Eds: Sabu Thomas and Gennady Zaikov Publisher: Nova Science Publishers, Inc., USA – (2008)
      Technical Reports:
 1.Inhibition of Chronic Osteomyelitis using Sustained Release of Drug from Biodegradable Polymeric Chip ,Sudipta Senapati, Shyam K Saraf and Pralay Maiti
   Annals of Pharmacology and Pharmaceutics 2(25): 1128 (2017)
2. IIT (BHU) Detailed Study Show Waste Plastics Road Retains Mechanical Properties
   Ujjwal Srivastava, Shivaji Hemant Wankhade, Dipti Saxena and Pralay Maiti
   http://www.plastemart.com  March 1st, 2018
   http://www.plastemart.com/plastic-technical-articles/iit-(bhu)-detailed-study-shows-waste-plastics-road-retains-mechanical-properties/2385
 3. Inhibition of Chronic Osteomyelitis using Sustained Release of Drug from Biodegradable Polymeric Chip
     Pralay Maiti, Sudipta Senapati and Shyam K Saraf  Clinics in Oncology 3: 1406 (2018)
 

                                                                               
                                                                                                                                            Contact
                                                                                                                     School of materials science IIT(BHU)

   

    Patents:
     1. A Nanoherbicidal Composition and a Method for its Preparation and Uses Thereof
          Reshu Bhardwaj, Preeti Maiti, Om Prakash, Ram Kumar Singh and Pralay Maiti
          Indian Patent Application No. 202111002570 filed on Junuary 19, 2021
     2. Development of Functional porous polymeric membrane using accelerator for separation of f-block elements
         Pralay Maiti, Om Prakash,  Amole M. Mhatre,  Rahul Tripathi and Ashok Kumar Pandey.
        Indian Patent Application No. 202011023201 filed on June 02, 2020
     3. A Novel Polymer Blend Utilizing Waste Plastics and Process of Preparation Thereof
        Pralay Maiti and Dipti Saxena
        Indian Patent Application No. 201911031635 filed on August 05, 2019
     4. A Novel Polymeric Hydrogel for Treating Melanoma Cancer and A Method Thereof
        Pralay Maiti, Aparna Shukla and Akhand Pratap Singh
        Indian Patent Application No. 201911015958 filed on April 22, 2019
     5. A Bio-piezoelectric Device and a Method of Preparation Thereof  
         Anupama Gaur, Chandan Kumar, Shivam Tiwari and Pralay Maiti
         Indian Patent Application No. 201911013972 filed on April 7, 2019
     6. Material for Faster Bone Healing
         Pralay Maiti, Arun Kumar Mahanta, Sairam Krishnamurthy, Pankaj Paliwal
        Indian Patent Application No. 201911013103 filed on April 2, 2019
     7. A Method for Preparation of Graphene Oxide Nanocomposites Based Sprayable Paint Coating
        Santanu Das, Rajarshi Bhattacharyya, Somak Bhattacharyya, Pralay Maiti
       Indian Patent Application No. 201911008550 filed on March 5, 2019
    8. A Metal Ceramic Joint Adhesive  [Transferred Technology to Industry]
         Pralay Maiti, Shivam Tiwari and Santanu Das
        Indian Patent Application No. 201911002765 filed on January 23, 2019
    9. A Cyclodextrin Grafted Polyurethane Hydrogel for Drug Delivery and a Method of Making the Same
          Aparna Shukla, Akhand P. Singh and Pralay Maiti
         Indian Patent Application No. 201811035914 filed on September 24, 2018
     10. Nanohybrid with High Energy Harvesting Efficiency
          Shivam Tiwari, Anupama Gaur, Chandan Kumar and Pralay Maiti
          Indian Patent Application No. 201811018838 filed on May 19, 2018
     11. A Bio-waste Polymer Hybrid with High Energy Harvesting Efficiency
         Chandan Kumar, Anupama Gaur, Shivam Tiwari, Sanjay Kumar Rai and Pralay Maiti
         Indian Patent Application No. 201811016816 filed on May 3, 2018
     12. A Bioactive Glass as an Orthodontic Adhesive and a Method of Production Thereof
         Ajit V. Parihar, Sadhana Swaraj, Pralay Maiti, Sudipta Senapati, T. P. Chaturvedi
         Indian Patent Application No. 201811014080 filed on April 12, 2018
     13. Functionalized Graphene Oxide Based Nanoprobes
         Pralay Maiti, Sudipta Senapati and Dinesh K. Patel
          Indian Patent Application No.  201811009385 filed on March 14, 2018
     14. A Nanocarrier for Delivering GeneticMaterials and A Method of Preparation Thereof
         Pralay Maiti and Sudipta Senapati
         Indian Patent Application No. 201811004496 filed on February 06, 2018
     15. A Novel Polymeric Patch for Treating Melanoma Cancer and A Method Thereof
         Pralay Maiti, Aparna Shukla and Akhand P. Singh
         Indian Patent Application No. 201711045345 filed on December 18, 2017
      16.  A Self-expanding Shape-Memory Polymer Nanohybrid and a Method of Preparing the Same
         Pralay Maiti and Arpan Biswas
         Indian Patent Application No. 201711030194 filed on August 25, 2017
      17. A Method to enhance thermal Stability and Efficiency in Porous Fluoropolymer Hybrid Membrane
        Pralay Maiti and Om Prakash
        Indian Patent Application No. 201711027183 filed on July 31, 2017
      18. A Medicated Biodegradable Patch for Treating Wounds and a Method Thereof [Transferred Technology to Industry]
        Pralay Maiti, Arpan Biswas and Manoranjan Sahu
        Indian Patent Application No. 201711003060 filed on January 27, 2017
      19. A Method for Stabilizing an Ayurvedic Wound Healing Formulation  [Transferred Technology to Industry]
         Pralay Maiti, Arpan Biswas, Manori Amarazeewa and Manoranjan Sahu
         Indian Patent Application No. 201611041318 filed on December 02, 2016
      20. A Method for Controlled Biodegradation of Biopolymer Using Inorganic Salts and Product Thereof
         Sunil Kumar and Pralay Maiti
         Indian Patent Application No. 201611029959 filed on September 01, 2016
      21. A Novel Viscoelastic Polyurethane and a Process for the Preparation Thereof
         G. Saraswathy, G. Gautham, B.N. Das, R. Mohan, P. Aruna, P. Maiti and G. Radhakrishnan
         Indian Patent Application No. 2413Del2008 filed on October 23, 2008.

 

 

 Honors and Awards:

“Prof. M. Santappa Silver Jubilee Award” by The Society of Polymer Science, India (2010)

 “APA Young Scientist Award” by Asian Polymer Association (APA) (2013)

 “National Award for Technology Innovation” by the Ministry of Chemicals and Fertilizers, Government of India (2013)

“Special recognition of important contribution to research using IUAC facilities” by IUAC, New Delhi (2013)

"NASI-Reliance Industries Platinum Jubilee Award" by The National Academy of Sciences, India (2018)
 
"Tata Innovation Fellowship 2020" by  The Department of the Biotechnology,  Government of India (2020)
   

Fellow
West Bengal Academy of Science and Technology (FAScT) (2019)  

  
 

 

            

Ongoing / Completed Projects

Sl. No. Title Funding agency Duration Amount
(Rs. in lakh)
1. Thermoreversible gelation of soft materials UGC-DAE-CSR, Mumbai 2006-2010 4.5
2. The effect of ion beam on PVDF/layered silicate nanocomposites IUAC,
New Delhi		 2006-2009 3.5
3. Synthesis and structural characterization of novel segmental polyurethane/layered silicate nanocomposites CSIR 2006-2010 5.0
4. Sustainable Green Nanocomposites from Renewable Resources DBT 2007-2011 40.72
 
5. Development of optically active polymers for data storage applications DIT-MBIL 2007-2010 200.7
6. Improvement of physical properties of polymer through nanocomposites route: Special application to paint technology Asian Paints Ltd. 2009-2010 5.0
7. Porous polymeric membrane using swift heavy ions IUAC 2010-2013 4.0
8. Synthesis and characterization of novel segmented polyurethane-graphene nanocomposites for biomedical applications CSIR 2013-2016 23.0
9. Chitosan Nanocomposite Scaffold for Drug Delivery and Tissue Engineering IIT (BHU) 2015-2017 15.0
10. Polymeric Nanobiohybrids for Tissue Engineering and Drug Delivery SERB, DST  2016- 24.0
11. Hierarchically Structured Micro-Nano Pore Nanocomposite Membrane made of Ferric-Oxide Decorated-Titania-Activated-Carbon-Flyash in
Carbonized Epoxy Resin as Versatile Filters for Water Purifications:Removal of Organic-Dyes-Heavy-Metals-Microbial-Pathogens		 IMPRINT (SERB) 2016-2019 10.0
12. Understanding the mechanism of action through cell biology and upgradation of herbal drug in solution and biodegradable patch for the treatment of diabetic foot ulcer BIRAC, DBT  2018- 28.6
13. Radionuclide sensing platform based on functionalized polymer having nanochannels using accelerator BRNS/DAE  2018- 35.0
14. Development of Anticorrosive Paints Harind Chemical and Pharmaceuticals Pvt. Ltd.  2018- 1.2
15. Photonic radiative cooler for passive sub-ambient cooling IMPRINT (SERB) 2019- 41.88
16. Chemical modification of Guar Gum to improve its properties  Hindustan Gum & Chemicals Ltd. 2019- 7.7
17. Aging studies and estimation of thermal properties of liner materials DRDO 2019- 156.85

 
 
 
 

                                                                          
                                                  GROUP MEMBERS
Current PhD students
Sunil Kumar
Research Interest: Polymer Based Nanocomposites for Solar Cell Applications.
Enrolment Year: 2014
sunilgmpp@gmail.com                             +91-9455364439
​​​ Ravi Prakash
Research Interest: Quantum Dots & Polymer Nanocomposites for Solar Cell Applications.
Enrolment Year: 2016
raviprakashprksh4@gmail.com                  +91-7275320400
​​​ Shivam Tiwari
Research Interest: Piezoelectric Materials, Polymer Composites,Electrospun Fibers, Energy Harvesting.
Enrolment Year: 2017
shivamtiwari.rs.mst17@itbhu.ac.in                +91-9454884740
 
​​​ Pravesh Kumar Yadav
Research Interest: Synthesis of Conducting Polymers, Solar cell Applications.
Enrolment Year: 2017
praveshkryadav.rs.mst17@itbhu.ac.in         +91-9889990924
 
 Swapan Maity
 Research Interest: DNA/RNA/ Gene Delivery.
 Enrolment Year: 2019
 swapanmaity.rs.mst19@itbhu.ac.in             +91-8101977183
Sudepta Bauri
Research Interest:Polymer Synthesis, Drug delivery
 Enrollment Year: 2019
sudeptabauri.rs.mst19@itbhu.ac.in             +91-8726425875
  Amita Santra
Research Interest: Polymers, Drug Delivery, Biomedical applications
Enrollment Year: 2020
amitasantra.rs.mst20@itbhu.ac.in                 +91-7980943532
  Swikriti Tripathi
Research Interest: Graphene based materials for cancer therapy
Enrollment Year: 2020
swikrititripathi.rs.mst20@itbhu.ac.in          +91-7250780350
  Subham Sekhar Mandal
Research Interest: Polymer-based drug delivery for diabetic application
Enrollment Year: 2021
subhamsekharmandal.rs.mst21@itbhu.ac.in   +91-7407340821
  Avishek Mallick Choudhury
Research Interest: Drug Delivery, Biodegradable Polymers
Enrollment Year: 2021
avishekmchoudhury.rs.mst21@itbhu.ac.in    +91-8100811374

                                                                                     

 
Postdocs/ Alumni
                                                 
    Dr. Akhand P. Singh
 Research Interests: Controlled Drug Delivery in Cancer Model, Drug  Discovery and  Drug Development.
contactsinghap@gmail.com                                +91-9795671179
   Dr. Pallavi Kumari
 Research Interests: Conjugated Polymer, Block copolymer and Polymer nanocomposite for electronic and biomedical application.
palcuj31@gmail.com                                        +91-8092543767
 
  Dr. Sunil Kumar
Research Interests: Controlled biodegradation of polymer by enzyme in presence of nanoparticles, Designing the polymeric scaffold formation for controlled drug delivery.

  sunilbt13@gmail.com                                   +91-9026634509

 

Ph.D. AWARDED
​​​ Dr. P. Jaya Prakash Yadav
Current Position: Post-Doctoral Fellow at National Taiwan University, Taipei, Taiwan
jpyadav.palamari@gmail.com
 
​​​ Dr. Abhinay Mishra
Current Position: Post-doctoral at Nanyang Technical University, Singapore
abhinaymishra22@gmail.com
 
​​​ Dr. Narendra K. Singh
Current Position:Pohang University of Science and Technology( POSTECH)
narendraitbhu@gmail.com
​​​ Dr. Vimal K. Tiwari
Current Position: Post-Doctoral Fellow at Yonsei University, Seoul, South Korea
vimalitbhu@itbhu.ac.in
 
​​​ Dr. Karun K. Jana
Current Position: Post-Doctoral Fellow at National Taiwan University, Taipei, Taiwan
kkjana.rs.mst11@itbhu.ac.in
​​​ Dr. Dinesh K. Patel
Current Position: Post-Doctoral Fellow at Incheon national University, Seoul, South Korea
dbhu10@itbhu.ac.in
 
​​​ Dr. Arun Kumar Mahanta
Current Position: Post-Doctoral Fellow at IIT (BHU)
chem.arun11@gmail.com
 
 
Dr. Sudipta Senapati
Current Position: Post-Doctoral Fellow at Isreal
s.senapati111@gmail.com

 
​​​ Dr. Arpan Biswas
Current Position: Post-Doctoral Fellow at University of Bayreuth, Germany
abiswas.rs.mst13@itbhu.ac.in
 
 
 Dr. Anupama Gaur
Research Interest: Piezoelectric polymer composites, Energy harvesting.
Enrolment Year: 2014
anupama.rs.mst14@itbhu.ac.in                    +91-7376991938
     Curriculam Vitae
 
 Dr.Aparna Shukla
Research Interest:  Polymer Synthesis, Drug Delivery.
Enrolment Year: 2014
aparnas06.chem@gmail.com                     +91-9454750865
 Dr. Dipti Saxena
Research Interest:  PET Nanocomposites, Mechanical Properties, Structural Analysis.
Enrolment Year: 2015
 diptis.rs.mst15@itbhu.ac.in
 
 Dr. Om Prakash
 Research Interest: Applications of polymeric membrane, Fuel cell electrolytes,   Heavy metal filtration.
 Current Position: Assistant Professor , Department of Chemistry
 Kashi Naresh Govt. PG College Gyanpur, Bhadohi-U.P
 opbhu123@gmail.com                            +91-7398044406
   Curriculum Vitae
 

 

 

Co-supervised PhDs
Dr. Govinda Kapusetti
Research Interest: Bone Cement
Department: School of Bio-Medical Engineering
 
Dr. Sitashree Banerjee
Research Interest: Polymer as Anti-corrosive Agent
Department: Department of Chemistry
 
Dr. Mukty Sinha
Research Interest: Drug Delivery
Department: School of Bio-Chemical Engineering
 
Dr. Chelladurai K. Balavigneswaran
Research Interest: Modification of polymer for biomedical applications
Department: School of Biomedical Engineering

 

Students achievements-

1  Best Poster Award –ICAPST- 2008, New Delhi, India. Vimal  Kumar Tiwari
2 Best Poster Award – APSRT, 2011 IIT  Kharagpur, India Vimal  Kumar Tiwari
3 Best Oral Presentation - NCTP- 2011, Applied Physics IIT BHU Varanasi India Vimal  Kumar Tiwari
4 Best poster Award -NIB 2011-IUAC,  Delhi India Vimal  Kumar Tiwari
5 Best Student Conclave Oral Award – APA-2014, IIT Delhi, India. Karun Kumar Jana
6 Best Poster Award – RAPT-2014, Kolkata University, India  Karun Kumar Jana
7 Best Poster Award – MARCRO-2017  Kerala, India Anupama Gaur
8 Wisdom Contest Award - APA 2017 Delhi,  India  Anupama Gaur
9 Best Poster award - APA 2017  Delhi , India    Aparna Shukla
10 Best poster award  - ACS Forum 2018  Varanasi ,India   Aparna Shukla
11  Ancient Indian Science and Technology Gold Medal 2018, Varanasi  India Arpan Biswas
12 Best oral presentation award - ISASP 2018, Guwahati ,India Arpan Biwas
13 Best Poster Award- NSETCS 2018 Varanasi, India Sunil kumar
14 Best Oral Presentation –Polymers: Usefulness and current concerns, MNIT Allahabad ,India Arun Mahanta
15 Third Prize in Short invited lecture -   ICM 2021, Mahatma Gandhi  University, Kottayam, Kerala, India  Om Prakash
16 Third Prize in Short invited lecture -   ICM 2021, Mahatma Gandhi  University, Kottayam, Kerala, India  Shivam Tiwari
17. Third Prize in Short invited lecture -   ICES 2021, Mahatma Gandhi  University, Kottayam, Kerala, India  Shivam Tiwari
18. First place in oral presentation:Scientifique, RIC 2022, IIT Guwahati, India  Shivam Tiwari
19. Best Poster award, APA NANOFORUM-2022, New Delhi, India  Shivam Tiwari
20. Best Paper award, BDES-2022,K.N.Govt. PG Bhadohi U.P., India  Shivam Tiwari
21. First Prize in Short invited lecture -   ICM 2022, Mahatma Gandhi  University, Kottayam, Kerala, India Swikriti Tripathi

 

Research Highlights

Polymer membranes , remove radioactivewaste  and Power genration-Nature India

Hydrogel toferry skin cancer drugs -Nature India

Sutures,stent from Nanohybrid material -Nature India

Bio-materials for drug Delivery Scaffolds -Nature India

Hybrid Scaffold -potential chemotheraputic implant -Global Medical Discovery

SHI for conversion elctroactive phase in PVDF-Renewable Energy Global Innovation

Nanocomposites as a potential biomaterial for joint implant  -Global Medical Discovery

Polymer -Solvent intercalates -Macromolecular Symposia

Nanoscale Biomaterial for replacement of bone and blood vessels -Photonics Media 

Nanocomposites Induced Biomaterial-Nanoscience and nanotechnology Letter

News Stories

Development of Injectable Cancer Treatment

https://biotechtimes.org/2019/04/23/new-method-for-controlled-release-makes-cancer-drugs-less-toxic-to-healthy-tissues/
 
https://www.thehindubusinessline.com/news/science/new-method-for-controlled-release-makes-cancer-drugs-less-toxic-to-healthy-tissues/article26921312.ece
 
https://www.downtoearth.org.in/news/health/new-method-for-controlled-release-makes-cancer-drugs-less-toxic-to-healthy-tissues-64131
 
http://vigyanprasar.gov.in/isw/New_method_for_controlled_release_makes_cancer_drugs_less_toxic_hindi.html
 
https://delhipostnews.com/new-method-for-controlled-release-makes-cancer-drugs-less-toxic-to-healthy-tissues/

Development of Metal Ceramic Adhesive joints

http://www.rashtriyasahara.com/epapermain.aspx?queryed=22&eddate=06%2f19%2f2019   (Page 5)                                                                                          

 

https://www.patrika.com/varanasi-news/know-about-iit-bhu-this-technique-wich-will-give-big-blow-to-china-4726433/
 

                                    
 
             

 
                  

            
                                                                                                        

                    

    

           

     

     
                                                                                                                 
                                                                                                           

Group Photograph