Research / MEC- Research Publications-1

Publications:

(a) Refereed International Journals (From 1st April 2016 to 31st March 2017)

  1. Sakendra Kumar S. P. Tewari, (2017) Metallurgical and Mechanical characterization of A319 Aluminum Alloy Casting Solidified Under Mold Oscillation. American Foundry Society, Springer International Publishing, SCI, DOI: 10.1007/s40962-017-0135-x, ISSN 1939-5981,Online ISSN2163-3193,pp 1–8

  2. Sakendra Kumar S. P. Tewari, (2016) Evolution of Microstructure of A356 Aluminum Alloy Casting prepared Under Vibratory Conditions during the Solidification. Indian Academy of Sciences, Sadhana, SCI, Vol. 41, No. 10, October 2016, pp. 1203–1208

  3. A.P.Harsha, P.K.Limaye, Rajnesh Tyagi, & Ankit Gupta, 2016. Development of Tribological Test Equipment and Measurement of Galling Resistance of Various Grades of Stainless Steel. Transaction of ASME Journal of Tribology, Vol.138(2) pp.024501-1 – 024501-6, ISSN : 0742-4787

  4. A.P.Harsha, P.K.Limaye, Rajnesh Tyagi, & Ankit Gupta, 2016, Effect of temperature on galling behavior of SS 316, 316 L and SS 416 under self-mated condition, Journal of Materials Engineering and Performance, Vol. 25(11), pp.4980-4987.ISSN :1059-9495

  5. A.Kashyap, & A.P.Harsha, 2016, Tribological studies on chemically modified rapeseed oil with CuO and CeO2 nanoparticles, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol. 230(12), pp.1562-1571. ISSN : 1350-6501

  6. R.N.Gupta, & A.P. Harsha, 2017, Synthesis, characterization, and tribological studies of calcium–copper–titanate nanoparticles as a biolubricant additive. Transaction of ASME Journal of Tribology, Vol.139(2), pp.021801-1-021801-11,ISSN : 0742-4787

  7. A.P.Harsha, R.Wäsche, & M. Hartelt, 2017, Friction and wear studies of polyetherimide composites under oscillating sliding condition against steel cylinder, Polymer CompositesVol.38 (1) January pp. 48–60, DOI 10.1002/ pc.23559, ISSN : 0272-8397

  8. Vinay Jaiswal, Kalyani, Sima Umrao, Rashmi B. Rastogi, Rajesh Kumar, and Anchal Srivastava, (2016) Synthesis, Characterization, and Tribological Evaluation of TiO2-Reinforced Boron and Nitrogen co-Doped Reduced Graphene Oxide Based Hybrid Nanomaterials as Efficient Antiwear Lubricant additives, ACS Appl. Mater. Interfaces, 8, 18, 11698–11710

  9. Anil P M, Rajesh Kumar, Sethuramiah A, (2017) Effect of initial roughness and oxidation on the running-in wear of machined surfaces under dry sliding, Int. J. of Surface Science and Engineering, 11, 1 45-64

  10. Nirupama Patra, Vivek Gupta, Ravi Singh, Pradyumna Ghosh, R.S.Singh, Arun Nayak (2017) “An Experimental Analysis of Quenching of Continuously heated vertical rod with aqueous Al2O3 nanofluid” Resource-Efficient Technologies

  11. B. Singh & S.K. Shukla (2016) Experimental analysis of combustion characteristics on a variable compression ratio engine fuelled with biodiesel (castor oil) and diesel blends, Biofuels, 7:5, 471-477, DOI: 10.1080/17597269.2016.1163210

  12. Sunil Kumar and S.K. Shukla, A Review on Recent Gasification Methods for Biomethane Gas Production, International Journal of Energy Engineering,6(1A),32-43, 2016.

  13. Sunil Kumar and S.K. Shukla,(2016) Performance of cyclone separator for syngas production in downdraft gasifier, International Journal of Advances in Energy Research,4(3), 223-237. DOI: http://dx.doi.org/10.12989/eri.2016.4.3.223

  14. Ajeet Kumar, S.K.Shukla and J.V.Tirkey (2016), A review of Research and Policy on Using Different Biodiesel oils as Fuel for I.C.Engine, Energy Procedia 90(C),292-304

  15. Shalin and S.K.Shukla “Synthesis of Tio2 Nanoparticle Using Sol-Gel Route And Testing Its Photovoltaic Performance In Dye-Sensitized Solar Cell" has been accepted for publication 4th issue of 2016 in Applied Solar Energy (Springer).

  16. S.K.Shukla and R.K.Khandal (2016), Design Investigations on Solar Cooking Devices for Rural India, Distributed Generation and Alternative Energy, 31(1), 29-65.

  17. B.Singh, S.K.Shukla and J.V.Tirkey,(2016) Performance and Emission Characteristics of VCR Engine with Castor Oil Biodiesel, International Journal of Power and Energy System, Acta Press, 36(3) 96-103.

  18.  Arun Kumar and S.K. Shukla (2016), Analysis and performance of ORC based solar thermal power plant using benzene as a working fluid Procedia Technology 23, 454 – 463

  19. Sunil Kumar, Kunal Kanoi, Shweta Kumari and S.K. Shukla, (2106) An Investigation On Tar Reduction In Producer Gas In Downdraft Gasifier Sysyem, Journal of Solid Waste Technology and Management, 42(1) 721-729.

  20. Yang Li, PhD, Guy R. Fogel, Zhenhua Liao, PhD, Rajnesh Tyagi, PhD, Gaolong Zhang, PhD and Weiqiang Liu, PhD, (2017) “Biomechanical Analysis of Two-Level Cervical Disc Replacement With a Stand-Alone U-Shaped Disc Implant” SPINE, Vol. 42. Wolters Kluwer Health, Inc. DOI: 10.1097/BRS.0000000000002128.

  21. Pushkar Jha, R.K. Gautam, Rajnesh Tyagi (2017) “Friction and wear behavior of Cu-4 wt. % Ni –TiC composites under dry sliding conditions” Accepted, FRICTION, Springer, ISSN: 2223-7690.

  22. Pushkar Jha, R.K. Gautam, Rajnesh Tyagi, and Devendra Kumar (2016) “Sliding Wear Behavior of TiC-Reinforced Cu-4 wt.% Ni Matrix Composites” Journal of Materials Engineering and Performance, 25:4210–4218.

  23. Awani Bhushan,S. K. Panda,Debashis Khan,Abhinav Ojha,K. Chattopadhyay,H. S. Kushwaha and I. A. Khan (2016) Weibull Effective Volumes, Surfaces and Strength Scaling for Cylindrical Flexure Specimens having Bi-modularity; ASTM (American Society of Testing of Materials); J of Testing and Evaluation. 2016; Vol 44 (5); pp. 1978 -1997

  24. Saumya Shah and S K Panda (2017) Bimodularity of interface layer and curing stress coupling effects on mixed mode fracture behaviour of functionally graded tee joint; International Journal of Adhesion and Adhesives: 2017; Vol 75: pp 74-87

  25. M. Vashista, S. Paul (2016) Effect of process parameters on convective heat transfer coefficient of fluid and heat partitioning in high efficiency deep grinding with water based coolant, International Journal of Machining and Machinability of Material, Vol. 18, Nos. 5/6, 2016, pp. 572-585 Inderscience Publisher

  26. Sarkar J, Joshi D. Extended exergy analysis based comparison of subcritical and transcritical refrigeration systems, International Journal of Air-Conditioning and Refrigeration, 2016; 24(2): No. 1650009.

  27. Sarkar J, Joshi M. Advanced exergy analysis of transcritical CO2 heat pump system based on experimental data, Sadhana (Indian Academy of Sciences), 2016; 41(11): 1359-1356.

  28. Mishra S, Sarkar J. Performance analysis of refrigerants based on ejector expansion technology, International Journal of Mechanical And Production Engineering, 2016; 4(3): 40-43.

  29. Sarkar J. Comprehensive study on the role of eco-friendly working fluid properties on ORC performances, International Journal of Thermodynamics, 2016; 19(4): 198-204.

  30. Mishra S, Sarkar J. Performance characteristic of low-GWP R134a alternative refrigerants in ejector expansion refrigeration system, Archives of Thermodynamics, 2016; 37(4): press.

  31. Sarkar J. Performance analyses of novel two-phase ejector enhanced multi-evaporator refrigeration systems, Applied Thermal Engineering, 2017; 110: 1635-1642.

  32. Sahoo RR, Ghosh P, Sarkar J. Energy and exergy comparisons of water based optimum brines as coolants for rectangular fin automotive radiator, International Journal of Heat and Mass Transfer, 2017; 105: 690–696.

  33. Sarkar J. Property-based selection criteria of low GWP working fluids for organic Rankine cycle, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017; 39(4): 1419-1428.

  34. Sahoo RR, Ghosh P, Sarkar J. Performance enhancement for wavy fin automotive radiator using optimum PG brine based nanofluids, Heat Transfer - Asian Research, 2016; press.

  35. Sahoo RR, Sarkar J. Heat transfer performance characteristics of hybrid nanofluids as coolant in louvered fin automotive radiator, Heat and Mass Transfer, 2016; press.

  36. Sahoo RR, Ghosh P, Sarkar J. Performance analysis of a louvered fin automotive radiator using hybrid nanofluid as coolant, Heat Transfer - Asian Research, 2016; press.

  37. Sarkar J. Improving thermal performance of microchannel electronic heat sink using supercritical CO2 as coolant, Thermal Science, 2017; press.

  38. G.K. Gugliani, A. Sarkar, S. Mandal and V. Agrawal (2017) Location wise comparison of mixture distributions for assessment of wind power potential: A parametric study. International Journal of Green Energy. ISSN: 1543-5075. IF: 1.6 (Accepted with minor revisions)

  39. Arnab Sarkar, Gaurav Gugliani and Sneh Deep (2017) Weibull Model for Wind Speed Data Analysis of Different Locations in India. KSCE Journal of Civil Engineering DOI: 10.1007/s12205-017-0538-5. ISSN: 1226-7988. IF: 0.6

  40. Shah, S., Panda, S. K. and Khan, Debashis (2016) Weibull Analysis of H-451 Nuclear-Grade Graphite, Procedia Engineering, Vol 144, pp. 366- 373

  41. Khan, Debashis, Singh, Shushant, and Needleman, A. (2017) Finite Deformation Analysis of Crack Tip Fields in Plastically Compressible Hardening-Softening-Hardening Solids, Acta Mechanica Sinica, Vol. 33, No. 1, pp. 148-158.

  42. Manvandra Kumar Singh, Rakesh Kumar Gautam, “Synthesis of copper metal matrix hybrid composites using stir casting technique and its mechanical, optical and electrical behaviors”. Transactions of the Indian Institute of Metals ISSN: 0975-1645.

  43. Manvandra Kumar Singh, Rakesh Kumar Gautam. “Mechanical and electrical behaviour of developed copper based hybrid composites”. Materials Today: Proceedings ISSN: 2214-7853.

  44. Manvandra Kumar Singh, Rakesh Kumar Gautam. “Mechanical and tribological properties of plastically deformed copper metal matrix nano composite”. Materials Today: Proceedings ISSN: 2214-7853.

  45. N. Kumar, G. Gautam, R. K. Gautam, A. Mohan, S. Mohan. “A Study on Mechanical Properties and Strengthening Mechanisms of AA5052/ZrB2 insitu Composite”, Journal of Engineering Mat. and Technol.-Transaction of ASME 139 (2017) pp. 011002-1-011002-8

  46. N. Kumar, G. Gautam, R. K. Gautam, A. Mohan, S. Mohan. “High Temperature Tribology of AA5052/ZrB2 PAMCs”, Journal of Tribology-Transaction of ASME 139 (2017) pp. 011601-1-011601-12.

  47. Pushkar Jha, R.K. Gautam, Rajnesh Tyagi, and Devendra Kumar, Sliding Wear Behavior of TiC-Reinforced Cu-4 wt.% Ni Matrix Composites Journal of Materials Engineering and Performance 4210—Volume 25(10) October 2016

  48. G. Gautam, N. Kumar, A. Mohan, R. K. Gautam, S. Mohan, “Synthesis and Characterization of Tri-aluminide insitu Composites”, Journal of Material Science 51 (2016) pp. 8055-8074.

  49. G. Gautam, N. Kumar, A. Mohan, R. K. Gautam, S. Mohan, “High Temperature Tensile and Tribological Behaviour of Hybrid (ZrB2+Al3Zr)/AA5052 insitu Composite”, Metallurgical and Materials Transactions A 47A (2016), pp. 4709-4720.

  50. G. Gautam, N. Kumar, A. Mohan, R. K. Gautam, S. Mohan, “Strengthening Mechanisms of (Al3Zrmp+ZrB2np)/AA5052 Hybrid Composites”, Journal of Composite Materials (2016) DOI 10.1177/0021998316631811.

  51. N. Kumar, G. Gautam, R. K. Gautam, A. Mohan, S. Mohan. “Wear, Friction and Profilometer Studies of insitu AA5052/ZrB2 Composites”, Tribology International 97 (2016), pp. 313–326.

  52. Anita Mohan, Gaurav Gautam, Narendra Kumar, Sunil Mohan, R. K. Gautam, “Synthesis and tribological properties of AA5052 base insitu composites”, Composite Interfaces 23(6) (2016) pp.503-518

  53. S. Mohan, G. Gautam, N. Kumar, R. K. Gautam, A. Mohan, A. K. Jaiswal, “Dry sliding wear behaviour of Al-SiO2 composites”, Composite Interfaces 23(6) (2016) pp.493-502

  54. G. Gautam, N. Kumar, A. Mohan, R.K. Gautam, S. Mohan, “Tribology and surface topography of tri-aluminide reinforced composites”, Tribology International 97 (2016) pp. 49–58.

  55. Abhishek Kumar, R. K. Gautam, Rajnesh Tyagi, Dry Sliding Wear of in-situ Synthesized Al-TiC Composites, Composite Interfaces, 2016, http://dx.doi.org/10.1080/09276440.2016.1148434.

  56. Faria Rehman, Manoj Dhiman, O. P. Singh, (2016) Effect of eigenvalue solution on characteristics of double diffusive salt fingers, J. Mech. Sci. Technol., 30(6) (Springer, impact factor: 0.761).

  57. Bharat Singh Patel, Cherian Samuel, and S.K. Sharma (2017), ‘Evaluation of agility in supply chain: a case study of an Indian manufacturing organization’,Journal of Manufacturing Technology Management, Vol. 28, No. 2, pp. 212-231.

  58. Kumar, M., & Samuel, C. (2017). Selection of best Renewable Energy Source by using VIKOR Method. Technology and Economics of Smart Grids and Sustainable Energy, (Accepted).

  59. Bharat Singh Patel, Cherian Samuel, and S.K. Sharma (2017), ‘Analyzing interactions of agile supply chain enablers in Indian manufacturing context’,International Journal of Services and Operations Management, accepted and in production.

  60. Kumar, M., & Samuel, C. (2017). Wind energy potential estimation with prediction of wind speed distribution. International Journal of Intelligent Systems Technologies and Applications, (Accepted).

  61. R.R.Sahoo,(2016) Heat transfer performance characteristics of hybrid nanofluidas coolant in louvered fin automotive radiator, Heat Mass Transfer, 2016,DOI 10.1007/s00231-016-151-x.

  62. R.R.Sahoo, P.Ghosh , J. Sarkar (2017) Performance Analysis of a Louvered Fin Automotive Radiator Using Hybrid Nanofluid as Coolant Heat Transfer - Asian Research, 2016; in press.

  63. R.R.Sahoo, P.Ghosh , J. Sarkar (2015) Performance comparison of various coolants for louvered fin tube automotive radiator, Thermal Science, 2015; in press.

  64. R.R.Sahoo, Experimental study on thermal performance of optimum propylene glycol brine as coolant for Rectangular fin Radiator, Heat Transfer - Asian Research,2017, in press.

  65. Sarvesh Kumar Mishra; U. Srinivas Rao and Sandeep Kumar (2016) Tool wear prediction by using wavelet transform International Journal of Precision Technology, Vol.6 Issue3/4, 216-230. ISSN: 1755-2060, eISSN: 1755-2079

  66. Ramajayam, K K, Kumar, A, Sarangi, S K, and Thirugnanam, A, A novel strategy to enhance cryosurgical outcome in gel phantoms, Cryobiology, 73(3) (2016) 417.

  67. Ramajayam, K K, Kumar, A, Sarangi, S K, and Thirugnanam, A, A novel adjuvant solution-layer strategy for imprving the efficacy of cryosurgy, Cryoletters, 37(5) (2016) 346-356.

  68. Ramajayam, K K, Kumar, A, Sarangi, S K, and Thirugnanam, A, A numerical study on optimising the cryosurgical process for effective tumour necrosis, Heat and Mass Transfer, 53(5) (2017) 1685-1697.
     

(b) Proceedings of International Conferences(From 1st April 2016 to 31st March 2017)

  1. RK Lal, VK Choubey, JP Dwivedi & VP Singh (2017) Residual stress analysis of equilateral Triangular sectioned bar of linear work-hardening materials under torsional loading", 7th Int Conf on Material Processing & Characterization (ICMPC-2017), 17-19th March, Organised by Dept of Mech Engg, GR Inst of Engg & Technology, Hyderabad.

  2. " Residual stress analysis of triangular cross-sectioned bar of linear work-hardening materials under torsional loading", RK Lal, VK Choubey, JP Dwivedi & VP Singh, 7th Int Conf on Material Processing & Characterization (ICMPC-2017), 17-19th March, Organised by Dept of Mech Engg, GR Inst of Engg & Technology, Hyderabad.

  3. Devendra Kumar Sinha and Santosh Kumar, 'Studies on Effect of Extrusion Shoe Groove Length in Continuous Extrusion Process', Proc. of 6th Int. Conf. & 27th AIMTDR-2016, at CEP, Maharashtra, INDIA, Dec. 16-18, 2016 (ISBN: 978-93-86256-27-0), pp 109-1813.

  4. Ambuj Sharma and Sandeep Kumar , “Modelling of Ultrasonic Guided Waves for Circular Cylindrical Structures using Finite Element Approach and Selection of Noise Filtering Technique” , NDT 2016, 55th Annual Conference, 12-14 Sept 2016, Nottingham , UK.

  5. Ajeet Kumar, S.K.Shukla and J.V. Tirkey. Life Cycle Assessment for the Production of Biodiesel in India, International Conference on Environmental systems and Sustainable Development ESSD16 (15-16th January 2016 Pune). ISSN: 2350- 0905, pp. 254-258.

  6. XLI. Ajeet Kumar, S.K.Shukla and J.V. Tirkey. An experimental investigation on the performance and emissions characteristics of Neem biodiesel blends in constant speed VCR engine, Hybrid and Composite Materials, Chemical Processing, 25-27th October 2016, Hyderabad, Telangana pp. 147-153

  7. Srivastava MV, Yadav A, Kumar A, Shukla SK, Tirkey JV. Performance and Emission Characteristics of VCR Engine using Coconut Biodiesel as a Fuel, International Conference on Go Green, 2017held at CT Bora College Shirur, Pune, January 12-13, 2017, Vol.(3) pp.01-10, ISSN 2350-0905.

  8. Pushkar Jha, R. K. Gautam and R.Tyagi (2017) “Modeling the dry sliding wear behavior of Cu-4wt%Ni-TiC composites using response surface methodology” 7th International conference on Materials  Processing and Characterization- 2017 (ICMPC – 2017) held during 17-19th March 2017 at Hyderabad, India.

  9. Avinash Ravi Raja, M. Z. Khan Yusufzai, M. Vashista, Characterization of advancing and retreating weld of friction stir welding of aluminium, International Conference on Advances in Materials & Manufacturing, (8-10 December 2016), Hyderabad, INDIA selected for Publication in Materials Today: Proceedings of Elsevier

  10. Sahoo RR, Sarkar J. Performance analysis of radiator by using optimum PG brine based nanofluids as coolant (TE159), 1st Int & 18th ISME Conference, Feb 23-25, 2017, NIT Warangal, India.

  11. Bhattad A, Sarkar J, Ghosh P. Energetic and exergetic performances of plate heat exchanger using brine based hybrid nanofluid for milk chilling application (TE106), 1st Int & 18th ISME Conference, Feb 23-25, 2017, NIT Warangal, India.

  12. Singh SK, Sarkar J. Numerical Simulation of shell and tube type condenser for Rankine power cycle using hybrid nanofluids (TE162), 1st Int & 18th ISME Conference, Feb 23-25, 2017, NIT Warangal, India.

  13. Rishikesh Kumar Singh, Arnab Sarkar and Jyoti Prasad Chakraborty. 2017. A Review on Gasification of Torrefied Biomass, International Conference on Challenges in Sustainable Development from Energy and Environment Perspective (CSDEEP), Gorakhpur, India, March 2017.

  14. Singh, Shushant, Khan, Debashis and Panda, S. K. (2016) A Numerical Study of Crack Tip Hydrostatic Stress Fields in Plastically Compressible Hardening Solids, Proceedings of the International Conference on Advances in Functional Materials (AFM 2016), August 08-11, 2016, ICC, Jeju Island, South Korea.

  15. Faria Rehman, O. P. Singh, (2016) Salt finger convection at neutral buoyancy ratio, 6th Int. & 43rd national Conf. on Fluid Mechanics and Fluid Power (FMFP), MNNIT Allahabad (India),15-17 Dec, India.

  16. Vinaytosh Mishra, Cherian Samuel, S K Sharma Supply Chain Partnership Assessment of a Diabetes Clinic: An Indian Example, Fifth Biennial Supply Chain Management Conference 2016, IIMB, 15-16 December 2016.

  17. Kumar, M., & Samuel, C. (2016, September). Statistical analysis of load demand distribution at Banaras Hindu University, India. In Advances in Computing, Communications and Informatics (ICACCI), IEEE, 2016 International Conference on (pp. 2318-2323).

  18. Vinaytosh Mishra, Cherian Samuel, S K Sharma ,Visualization of Perceived Expensiveness of Diabetes-Fuzzy MDS Approach, 016 Conference of IEEE UP Section on Electrical, Computer & Electronics Engineering ,9-11 December 2016 at IIT(BHU),Varanasi

  19. A Jasiwal1, C Samuel2, V Mishra3, K Singh, Green Supply Chain Impact Over The Rising Trend of Air Pollution Presented at International Conference on Design, Materials & Manufacturing Concerns in Production of Quality Engineering Goods  at HBTU, Kanpur, UP, March 27, 28 & 29, 2017 

  20. Kumar, M., & Samuel, C. (2017, March). A Multi-criteria Group Decision-Making Model for selection of Professional institute in India: Students perspective. International Conference on Business Research and Policy-2017, Chandragupt Institute of Management Patna (CIMP), Patna, 2017, March

  21. Vinaytosh Mishra, Anand Jaiswal , Cherian Samuel, S K Sharma Use of Wireless Technologies and IoT in Management of Diabetes, ICBRP-2017,CIMP ,Patna, 9-10 March 2017 

  22. Rashmi Rekha Sahoo and Jahar Sarkar.2017.PERFORMANCE ANALYSIS OF RADIATOR BY USING OPTIMUM PG BRINE BASED NANOFLUIDS AS COOLANT,1st International Conference and 18th ISME Conference.NIT Warangal, Feb. 2017

 

(c) Proceedings of National Conferences(From 1st April 2016 to 31st March 2017)

  1. G. Gugliani, A. Srivastava, K. D. Singh, N. Narwal, A. Sarkar and S. Mandal (2016) Time series analysis of wind speed data: a stochastic approach (16-17 December 2017) , IIT (BHU) organized by ISWE

  2. Bharat Singh Patel, Debashish Khan, and S.K. Sharma (2016), Towards Holistic Management in Corporate Sectors: Wisdom from Bhagavad Gita.National Conference on Cultural Heritage and Management (NCCHM), Department of Mechanical Engineering, IIT (BHU), Varanasi, May, 28-29.

  3. Kumar, M., & Samuel, C. (2016, May). Modern Green Building Concept in India: A New Face of Ancient Methodologies with Novel Features. National Conference on Cultural Heritage and Management-2016, Indian Institute of Technology (Banaras Hindu University), Varanasi

  4. Anand Jasiwal1, Cherian Samuel2, Manish Kumar, Impact of Green Supply Chain Management with trend analysis of air pollution Presented at NATIONAL CONFERENCE ON CONVERGENCE OF TECHNOLOGY AND MANAGEMENT FOR ADVANCING INDIA on the dates of 25th & 26th February, 2017

  5. Cherian Samuel and Bharat Singh Patel (2016), Facets of Indian Culture and Heritage considerable to Agility Management. National Conference on Cultural Heritage and Management (NCCHM), Department of Mechanical Engineering, IIT (BHU), Varanasi, May, 28-29.

  6. Ambuj Sharma, Kumar Kaushik Ranjan, Amit Tyagi (2016) Multi-scale simulation of Lamb waves containing harmonics ICTIMCAMS December 14-17, 2016, BHU, Varanasi, India.

  7. Kumar Kaushik Ranjan, Sandeep Kumar, Amit Tyagi, Ambuj Sharma (2016) Customized second generation finite element wavelets for linear elastostatic problems, ICTIMCAMS December 14-17, 2016, BHU, Varanasi, India.