kausik.met's picture
Dr. Kausik Chattopadhyay
Associate Professor
Department of Metallurgical Engineering Indian Institute of Technolog
kausik.met@iitbhu.ac.in
9451845661
+91-542-7165699
Area of Interest: 
Fatigue and Fracture, Deformation Behaviour, Structure-Property Relationship in Materials, Corrosion and Oxidation, Advanced Structural Materials, Failure Analysis, Severe Plastic Deformation.

 

Degree Institute/University Year of
Completion
Ph.D.
(Metallurgy)
 		  Indian Institute of Technology Kharagpur
Department of Metallurgical and Materials Engineering, India		 2008
M. Tech.
(Metallurgy)
 

Indian Institute of Technology Kanpur
Department of Materials and Metallurgical Engineering, India

 2003
B. E.
(Metallurgy)		 Bengal Engineering College, Shibpur (D.U.)
Department of Metallurgical Engineering, India (Presently known as Indian Institute of Engineering, Science and Technology)		 2000

 
 

  1. P. Chhillar, K. Chattopadhyay, P. Mishra, A. Upadhyaya, S. Sangal, “Automated Dihedral Angle Measurement in Sintered Heavy Alloys” Transactions of PMAI, Vol. 29, December 2003.
  2. K. Chattopadhyay, R. Mitra, G. Balachandran, K. K. Ray, “Effect of Mo on microstructure and mechanical behaviour of as-cast Nbss-Nb5Si3 composites”, Intermetallics, 2006, 14(12), 1452-1460.
  3. K. Chattopadhyay, R. Mitra, G. Balachandran, K. K. Ray, “Effect of Mo and Si on morphology and volume fraction of eutectic in Nb-Si-Mo alloys” Materials Science and Engineering A., 2007, 456(1-2), 358-363.
  4. K. Chattopadhyay, R. Mitra, and K. K. Ray, “Non-isothermal and Isothermal Oxidation Behaviour of Nb-Si-Mo alloys” Metall. Mater. Trans A., 2008, 39A, 577-592.
  5. R. Mitra, K. Chattopadhyay, A.K. Srivastava, K.K. Ray, N. Eswara Prasad, “Effect of Ductile and Brittle Phases on Deformation and Fracture Behaviour of Molybdenum and Niobium Silicide Based Composites”Key Engineering Materials, (2009), v. 395, pp. 179-192.
  6. G. SudhakarRao, J.K. Chakravarty, N. Saibaba, G.S. Mahobia, K. Chattopadhyay, N.C. SanthiSrinivas, V. Singh, “Low Cycle Fatigue Behavior of Zircaloy-2 at Room Temperature”, Journal of Nuclear Materials, (2013), 441(1-3), 455-467.
  7. G.S. Mahobia, Neeta Paulose, S.L. Mannan, K. Chattopadhyay, N.C. SanthiSrinivas, Vakil Singh, “Tensile behavior of superalloy IN718 in hot corrosive environment”, Journal of Materials Engineering and Performances, (2013), 22(12), 3810-3817.
  8. Mahobia GS, Sudhakar RG, Antony A, Chattopadhyay K, Santhi Srinivas NC, Singh V, ‘Effect of salt coatings on low cycle fatigue bahaviour of nickel base superalloy GTU-SU-718, Procedia Engineering, (2013), 55, 830-834.
  9. G.S. Mahobia, Neeta Paulose, S.L. Mannan, R.G. Sudhakar, K. Chattopadhyay, N.C. SanthiSrinivas, Vakil Singh, “Effect of hot corrosion on low cycle fatigue behavior of superalloy IN718”, International Journal of Fatigue, 2014, 59, 272-281.
  10. G. SudhakarRao, J.K. Chakravartty, N. Saibaba, G.S. Mahobia, Kausik Chattopadhyay, N.C.SanthiSrinivas, Vakil Singh, ‘Disappearance and reappearance of serrated plastic flow under cyclic loading: A study of dislocation substructures’, Materials Science and Engineering A, (2014), v. 603, pp. 114-120.
  11. Sanjeev Kumar, Sudhakar  R G, Kausik Chattopadhyay, G.S. Mahobia, Santhi  S N.C., Vakil  Singh, “Effect of Surface Nanostructure on Tensile Behaviour of Superalloy IN718”, Materials and Design, 62 (2014), 76-82.
  12. K. Chattopadhyay, V. Pandey, NC Santhi Srinivas, V. Singh, ‘Effect of Surface Nanostructure on Tensile and Low Cycle Fatigue Behavior of Al 2014 Alloy’, accepted in IOP: Materials Science and Engineering, 63 (2014), 110100.
  13. P. Singh, K. Chattopadhyay, I. Chakraborty, ‘Effect of sub-critical tempering and deep cryogenic treatment on slurry erosion of Cr-Mn-Cu white cast irons’, ISIJ International, (2014), Vol. 54, No. 10. 2294-2301.
  14. P.K. Rai, Vaibhav Pandey, K. Chattopadhyay, L.K. Singhal, V. Singh, ‘Effect of ultrasonic shot peening on microstructure and mechanical properties of high nitrogen austenitic stainless steel’, Journal of Materials Engineering and Performances, 2014, 23(11), 4055-64.
  15. Preeti Verma, G. SudhakarRao, P. Chellapandi, G.S. Mahobia, Kausik Chattopadhyay, N.C.  SanthiSrinivas, Vakil Singh, “Dynamic strain ageing, deformation, and fracture behavior of modified 9Cr–1Mo steel”, Materials Science & Engineering A, 621 (2015) 39–51.
  16. Y Shadangi, K Chattopadhyay, S B Rai, V Singh, ‘Effect of LASER Shock Peening on Microstructure, Mechanical Properties and Corrosion Behavior of Interstitial Free Steel’, Surface and Coatings Technology, 280 (2015), 216-224.
  17. V Pandey, SG Rao, K Chattopadhyay, NC SanthiSrinivas, V Singh, ‘Surface Nanostructuring and Cyclic Deformation of Aluminum Alloy 2014’, Materials Science and Engineering A, 647, (2015), 201-211.
  18. S C Ram, K Chattopadhyay, I Chakraborty, ‘Dry Sliding Wear Behavior of A356 Alloy/Mg2Sip Functionally Graded in-situ Composites: Effect of Processing Conditions’, Tribology in Industry, Vol. 38, No. 3, pp. 371-384, 2016.
  19. A Bhusan, S K Panda, D Khan, A Ojha, K Chattopadhyay, H S Kushwaha, I A Khan, ‘Weibull Effective Volumes, Surfaces, and Strength Scaling for Cylindrical Flexure Specimens Having Bi-Modularity’, Journal of Testing and Evaluation, vol. 24, No. 5, pp. 1978-1997, (2016)
  20. Sanjeev Kumar, K Chattopadhyay, Vakil Singh, ‘Effect of surface nanostructuring on corrosion behavior of Ti-6Al-4V alloy’, Materials Characterzation, vol. 121, pp. 23-30,  (2016).    
  21. Vakil Singh, Vaibhav Pandey, Sanjeev Kumar, N.C. Santhi Srinivas, and Kausik Chattopadhyay, "Effect of Ultrasonic Shot Peening on Surface Microstructure and Fatigue Behavior of Structural Alloys." Transactions of the Indian Institute of Metals, 69, no. 2 (2016): 295-301. 
  22. Sanjeev Kumar, GS Mahobia, K Chattopadhyay, Vakil Singh, ‘Hot corrosion behaviour of Ti–6Al–4V modified by ultrasonic shot peening’, Materials and Design, vol. 110, pp. 196-206, (2016)
  23. RS Rajpurohit, G Sudhakar Rao, K Chattopadhyay, NC Santhi Srinivas, Vakil Singh, ‘Ratcheting fatigue behavior of Zircaloy-2 at room temperature’, Journal of Nuclear Materials, vol. 477, pp. 67-76, (2016)
  24. Vaibhav Pandey, K.Chattopadhyay, N.C.Santhi Srinivas and Vakil Singh, ‘Low Cycle Fatigue Behavior of AA7075 with Surface Nanogradient Structure produced by Ultransonic Shotpeening’, Procedia Structural Integrity, 2 (2016), 3288-3295. 
  25. Vaibhav Pandey, K. Chattopadhyay, N. C. Santhi Srinivas and Vakil Singh, ‘Effect of stress relieving treatment on low cycle fatigue behavior of USSP treated 7075 aluminium alloy’, IOP Conf. Ser.: Mater. Sci. Eng. 194 (2017) 012037, doi:10.1088/1757-899X/194/1/012037
  26. Sanjeev Kumar, Kausik Chattopadhyay, S R Singh, Vakil Singh, ‘Surface nanostructuring of Ti-6Al-4V alloy through ultrasonic shot peening’, International Journal of Surface Science and Engineering, vol. 11, No. 1, pp. 23-35, (2017)
  27. Sanjeev Kumar, K Chattopadhyay, Vakil Singh, ‘Effect of ultrasonic shot peening on low cycle fatigue behaviour of the Ti-6Al-4V alloy’, Journal of Alloys and Compounds, vol. 724, pp. 187-197, (2017).
  28. Vaibhav Pandey, K. Chattopadhyay, N.C. Santhi Srinivas, and Vakil Singh. “Role of Ultrasonic Shot Peening on Low Cycle Fatigue Behavior of 7075 Aluminium Alloy”, International Journal of Fatigue, 103 (2017): 426-435.
  29. Vaibhav Pandey, J. K. Singh, K. Chattopadhyay, N.C. Santhi Srinivas, and Vakil Singh. “Influence of Ultrasonic Shot Peening on Corrosion behavior of 7075 Aluminum alloy”, Journal of Alloys and Compounds, 723 (2017): 826-840.  
  30. S.C.Ram, K.Chattopadhyay, I.Chakrabarty. “High Temperature Tensile Properties of Centrifugally Cast In-situ Al-Mg2Si Functionally Graded Composites for Automotive Cylinder Block Liners”, Journal of Alloys and Compounds, 724 (2017) 84-97.
  31.  DS Bandla, P Verma, K Chattopadhyay, V Singh, ‘Enhancement of Hot Corrosion Resistance of Modified 9Cr-1Mo Steel Through Surface Nanostructuring and Pre-oxidation’, Journal of Materials Engineering and Performance, 27(12), (2018), 6443-6457.
  32. D Pradhan, GS Mahobia, K Chattopadhyay, V Singh, ‘Effect of pre hot corrosion on high cycle fatigue behavior of the superalloy IN718 at 600° C’, International Journal of Fatigue, 114, (2018), 120-129.
  33. D Pradhan, GS Mahobia, K Chattopadhyay, ‘Severe Hot Corrosion of the Superalloy IN718 in Mixed Salts of Na2SO4 and V2O5 at 700 °C’, Journal of Materials Engineering and Performance, 27(8), (2018), 4235-4243.                                                                                                                                            
  34. Dhananjay Pradhan, Girija Shankar Mahobia, Kausik Chattopadhyay, Vakil Singh, ‘Effect of surface roughness on corrosion behavior of the superalloy IN718 in simulated marine environment’, Journal of Alloys and Compounds, 740 (2018), 250-263.    
  35. V Pandey, K. Chattopadhyay, NCS Srinivas, V Singh, ‘Thermal and microstructural stability of nanostructured surface of the aluminium alloy 7075’, Materials Characterization, 151, (2019), 242-251
  36. SC Ram, K. Chattopadhyay, I. Chakrabarty, ‘Microstructures and high temperature mechanical properties of A356-Mg2Si functionally graded composites in as-cast and artificially aged (T6) conditions’, Journal of Alloys and Compounds, 805, (2019), 454-470.
  37. Yagnesh Shadangi, Vikas Shivam, Manish Kumar Singh, Kausik Chattopadhyay, Joysurya Basu, NK Mukhopadhyay, ‘Synthesis and characterization of Sn reinforced Al-Cu-Fe Quasicrystalline matrix nanocomposite by mechanical milling’, Journal of Alloys and Compounds, 797, (2019), 1280-1287.
  38. S Kumar, V Pandey, K Chattopadhyay, V Singh, ‘Surface Nanocrystallization Induced by Ultrasonic Shot Peening and Its Effect on Corrosion Resistance of Ti–6Al–4V Alloy’, Transactions of the Indian Institute of Metals, 72(3), (2019), 789-792.
  39. V Pandey, JK Singh, K Chattopadhyay, NCS Srinivas, VSingh, ‘Optimization of USSP duration for enhanced corrosion resistance of AA7075,’ Ultrasonics, 91, (2019), 180-192.
  40. Pramod Kumar, GS Mahobia, V Singh, K Chattopadhyay, ‘LCF life improvement of biomedical Ti–13Nb–13Zr alloy through surface nanostructuring’, Materials Research Express, 6(12), (2019), pp. 125413.    
  41. Chandra Shekhar Kumar, Girija Shankar Mahobia, Arijit Podder, Sanjeev Kumar, Rahul Kumar Agrawal, Kausik Chattopadhyay, Vakil Singh, ‘Role of ultrasonic shot peening on microstructure, hardness and corrosion resistance of nitrogen stabilised stainless steel without nickel’, Materials Research Express, 6(9), (2019), pp. 096578.         
  42. Sanjeev Kumar, K Chattopadhyay, Vakil Singh, DVV Satyanarayana, Vikas Kumar, ‘Low cycle fatigue life of the alloy IN718 enhanced through surface nanostructuring’, Materials Characterization, 159, (2020), pp. 110066.      
  43. Chandra Shekhar Kumar, Girija Shankar Mahobia, Kausik Chattopadhyay, ‘Effect of ultrasonic shot peening on strain controlled fatigue behaviour of low nickel austenitic stainless steel’, Materials Today: Proceedings, (2020), https://doi.org/10.1016/j.matpr.2019.12.303.       
  44. Pramod Kumar, G.S. Mahobia, Kausik Chattopadhyay, ‘Surface nanocrystallization of b-titanium alloy by ultrasonic shot peening’, Materials Today: Proceedings, (2020), https://doi.org/10.1016/j.matpr.2019.10.174.
  45. Yagnesh Shadangi, Sakshi Sharma, Vikas Shivam, Joysurya Basu, Kausik Chattopadhyay, Bhaskar Majumdar and N K Mukhopadhyay, ‘Fabrication of Al-Cu-Fe quasicrystal reinforced 6082 Aluminium matrix nanocomposites through mechanical milling and spark plasma sintering’,
    Journal of Alloys and Compounds’, 828, July (2020),  154258.
  46. Sanjeev Kumar, Kausik Chattopadhyay, Vakil Singh, ‘Optimization of the duration of ultrasonic shot peening for enhancement of fatigue life of the alloy Ti‒6Al‒4V’, Journal Materials Engineering and Performance, 29(2), February (2020), 1214-1224.
  47. Rahul Kumar Agrawal, Vaibhav Pandey, Amruta Barhanpurkar Naik, Mohan R. Wani, Kausik Chattopadhyay and Vakil Singh, ‘Effect of ultrasonic shot peening duration on microstructure, corrosion behavior and cell response of cp-Ti’, Ultrasonics, 104, (2020), 106110.
  48. P Kumar, GS Mahobia, V Singh, Kausik Chattopadhyay, ‘Lowering of elastic modulus in the near-beta Ti-13Nb-13Zr alloy through heat treatment’, Materials Science and Technology, 836, March (2020), 1-9.  
  49. CS Kumar, K Chattopadhyay, V Singh, GS Mahobia, ‘Enhancement of low-cycle fatigue life of high-nitrogen austenitic stainless steel at low strain amplitude through ultrasonic shot peening’, Materials Today Communications, 25 (2020), 101576.
  50. Jaydeep Vishwakarma, K. Chattopadhyay, N.C. Santhi Srinivas, ‘Effect of build orientation on microstructure and tensile behaviour of selectively laser melted M300 maraging steel’, Materials Science and Engineering: A, 798, (2020), 140130.
  51. Y Shadangi, K Chattopadhyay, V Singh, ‘Microstructural Modification and Tensile Behavior of IF Steel Processed through Surface Mechanical Attrition Treatment’, JOM, (2020), 1-10.
  52. Vaibhav Pandey, Manish Kumar Singh, Joysurya Basu, K Chattopadhyay, NC Santhi Srinivas, Vakil Singh, Effect of surface nanostructuring in solution treated and thermally aged condition on LCF life of AA7075, Surface and Coatings Technology, (2020), 126431.
  53. D Mondal, K Chattopadhyay, V Singh, ‘Effect of Ultrasonic Shot Peening on Oxidation Behavior of T91 and SS347 Steels in Air and Steam at 650° C’, Journal of Materials Engineering and Performance, 29, (2020), 5854-5870.
  54. Yagnesh Shadangi, Vikas Shivam, Somarouthu Varalakshmi, Joysurya Basu, Kausik Chattopadhyay, Bhanskar Majumdar, NK Mukhopadhyay, ‘Mechanically driven structural transformation in Sn reinforced Al–Cu–Fe quasicrystalline matrix nanocomposite’, Journal of Alloys and Compounds, (2020), 155065.
  55. Vivek Kumar Pandey, Yagnesh Shadangi, Vikas Shivam, Joysurya Basu, Kausik Chattopadhyay, Bhaskar Majumdar, BN Sarma, Nilay Krishna Mukhopadhyay, ‘Synthesis, Characterization and Thermal Stability of Nanocrystalline MgAlMnFeCu Low-Density High-Entropy Alloy’, Transactions of the Indian Institute of Metals, 74(1), (2021), 33-44.
  56. Sanjeev Kumar, K Chattopadhyay, Z Alam, Vakil Singh, DV V Satyanarayana, Vikas Kumar, ‘Corrosion Behavior of Surface Nanostructured IN718 Superalloy at 650° C’, Materials Performance and Characterization, 11, (2021).
  57. Trishita Roy, Vikas Shivam, Kausik Chattopadhyay, R Manna, NK Mukhopadhyay ‘Microstructural Evolution and Mechanical Properties of Nano-Yttria Dispersed 316 L Austenitic Stainless Steel by Mechanical Alloying and Sintering’, Transactions of the Indian Institute of Metals, 74(8), pp. 2093-2104, (2021).
  58.  Pramod Kumar, GS Mahobia, Sumantra Mandal, V Singh, Kausik Chattopadhyay, ‘Enhanced corrosion resistance of the surface modified Ti-13Nb-13Zr alloy by ultrasonic shot peening’, Corrosion Science, 189, 109597, (2021).
  59.  Chandra Shekhar Kumar, Gaurav Singh, Suruchi Poddar, Neelima Varshney, Sanjeev Kumar Mahto, Arijit Saha Podder, Kausik Chattopadhyay, Amit Rastogi, Vakil Singh, Girija Shankar Mahobia, ‘High-manganese and nitrogen stabilized austenitic stainless steel (Fe–18Cr–22Mn–0.65 N): a material with a bright future for orthopedic implant devices’, Biomedical Materials, 16(6), 065011, (2021).
  60.  Pankaj Chauhan, Yagnesh Shadangi, Atul Bhatnagar, Vakil Singh, Kausik Chattopadhyay, ‘Influence of Surface Nano-Structuring on Microstructure, Corrosion Behavior and Osteoblast Response of Commercially Pure Titanium Treated Through Ultrasonic Shot Peening’, JOM, 1-12, (2022).

 

 

  1. Mechanical Behaviour of Nb-Si-Mo Alloys. (IT-BHU Special fund, BHU), 2008-2010, (PI)
  2. Low cycle fatigue behaviour of GTM-SU-718 at elevated temperature in marine environment, funded by GTRE,Rs.6.85 lakhs, 2009-2011 (Co-PI)
  3. Effect of surface nanocrystallization on fatigue life of aeronautical alloys: Timetal 834 and IN718, funded by DST, Rs.39,70,973.00, 2011-2014 (Co-PI)
  4. Hot deformation behavior of indigenously developed nitrogen bearing stainless steels for critical applications, funded by IIT (BHU), Rs. 20 lakhs. 2014. (Co-PI)
  5. Study of Weibull Statistical Design Criterion for Nuclear Graphite Components, funded by Board of Research on Nuclear Sciences (BRNS), BARC, Rs.79.15 Lakhs, 2012-15. (Co-PI)
  6. Effect of severe plastic deformation via ultrasonic shot peening on corrosion and stress corrosion cracking behavior of Al-alloy 7075, submitted as Institute Project (Individual) for funding, IIT (BHU), Rs.14.9 lakhs. 2015-17 (PI)
  7. Consultancy project on ‘Failure Analysis of Gudgeon Pin’, Maruti Suzuki India Limited, Rs.4.92 Lakh, 2019. (PI)
  8. Consultancy project on ‘Evaluation of SAILMA 550 grade steel and providing expert opinion on Penstock bursting’, Steel Authority of India Ltd., RDCIS, Rs.20.72 Lakh, 2017. (Co-PI)
  9. Design and Development of Indigenous Dental Implant of Titanium, funded by DST, Rs.84,16,723.00. 2015-18. (Co-PI)
  10. Studies on improvement in stiffness of aluminium alloys, DLJ, DRDO, Rs. 41 lakhs. 2015-2018. (Co-PI)
  11. Development of nickel free nitrogen austenitic stainless steel for biomedical applications, submitted to Steel Development Fund, Ministry of Steel, Rs. 284.44800 lakhs, 2016-2019, (Co-PI)
  12. Development of functionally graded armor composites (FGACs) materials, Armament Research Board, DRDO, Rs. 91.66240 Lakh, 2019-2022,  (Co-PI).
  13. Fabrication and Multi-centric trial of Indigenous Dental Implants of Titanium designed and developed at BHU for its validation, DST, Rs.59.82 Lakh, 2019-2021, (Co-PI).
  14. Creep and corrosion behaviour of novel MRI230D magnesium alloy with nanoparticles additions, CSIR, Rs.17.22 Lakh, 2019-2022, (Co-PI)
  15. Development of low-cost b-Ti alloy for biomedical applications, DST, Rs.48.08 Lakh, 2019-2022, (PI)
  16. Mechanical behaviour of advanced high strength steel processed by additive manufacturing, DST, 44.5 Lakh, 2019-2022, Co-PI. 
  17. Stability of nanostructure and residual stress developed through ultrasonic shot peening in superalloy IN718 at elevated temperatures, Rs.28.86 lakh, NRB, DRDO. 2020-2022  (PI).  
  1. K. Chattopadhyay, R. Mitra and K. K. Ray, “Microstructure and fracture behaviour of Nb-Si-Mo alloys” Conference proceedings in International Conference of Research Students in December 2004, IIT Madras, India.
  2. R. Mitra, K. Chattopadhyay, N. Eswara Prasad, K. K. Ray, “Structure-property relations in molybdenum and niobium silicide based composites”, Conference proceedings, International Conference on Advanced Materials Design and Development, December, 2005, Goa, India.
  3. K. Chattopadhyay, R. Mitra, G. Balachandran, K. K. Ray, “Room temperature mechanical behaviour of cast arc-melted Nb-Si-Mo alloys”, International Conference on Advances in Materials and Materials Processing, February, 2006, Kharagpur, India.
  4. K. Chattopadhyay, R. Mitra, G. Balachandran, K. K. Ray, ‘Deformation and Oxidation behaviour of Nb-Si-Mo alloys’, International symposium of research scholars, IITM, Chennai, 2006.
  5. K. Chattopadhyay, R. Mitra,  K. K. Ray, “Deformation Behaviour of Nb-Si-Mo Alloys at Room and Elevated Temperatures”, MRS fall meeting in December 1-5, 2008, Boston, MA, USA.
  6. G.S. Mahobia, K. Chattopadhyay, NC Shanti Srinivas, N. Prasad, and Vakil Singh, ‘Environmental effects on mechanical behavior of nickel based superalloys’, Fourteenth International Conference on Non-Ferrous Metals – 2010, Varanasi, India.
  7. Sudhakar R G, V. Singh, GS Mahobia, NC SanthiSrinivas, K. Chattopadhyay, 'Low cycle fatigue behaviour of Zircaloy-2', 6th International conference on creep, fatigue and creep-fatigue interaction (CF-6). January 22-25, 2012, Tamilnadu, India.
  8. GS Mahobia,  K. Chattopadhyay, NC SanthiSrinivas, V. Singh, 'Effects of salt environment on low cycle fatigue behaviour of nickel based superalloy', 6th International conference on creep, fatigue and creep-fatigue interaction (CF-6). January 22-25, 2012, Tamilnadu, India.
  9. Y Shadangi, K Chattopadhyay, SB Rai, V Singh, ‘Effect of LASER Shock Peening on Mechanical Behaviour of Interstitial Free Steel’, International Conference on Emerging Materials and Process 2014, CSIR-IMMT, Bhubanewwar, February, 2014.
  10. Awani Bhushan,  Debashis Khan, S.K. Panda and K. Chattopadhyay, "On the Shifting of Neutral Axis for Nuclear Grade Graphite Specimens", Proceedings of theInternational Conference on Multifunctional Materials, Structures and applications (ICMMSA 2014), December 22-24, 2014,  Centre for Interdisciplinary Research(CIR), Motilal Nehru National Institute of Technology, Allahabad, India. pp. 96-98.
  11. Awani Bhushan, Debashis Khan, S.K. Panda and K. Chattopadhyay,  "On the Analysis of J-integral for Nuclear Grade Graphite Specimen", Proceedings of the sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2014), December 29-31, 2014,  Department of Aerospace Engineering, Indian Institute of Technology, Kharagpur, India. pp. 186-187.
  12. Sanjeev Kumar, K Chattopadhyay and Vakil Singh,‘Tensile Behavior of Ti-6Al-4V alloy at Elevated Temperatures’, Proceedings of the International Conference on Multifunctional Materials, Structure and Application (ICMMSA -2014), 22-24 December, 2014, MNNIT, Allahabad, India.
  13. S C Ram, K Chattopadhyay, I Chakraborty, ‘Functionally Graded Al-(Mg2Si)P in-Situ Composites-A Review’, Proceedings of the International Conference on Multifunctional Materials, Structure and Application (ICMMSA -2014), 22-24 December, 2014, MNNIT, Allahabad, India.
  14. K Chattopadhyay, Pramod Kumar, V Singh, ‘Effect of Ultrasonic shot peening on microstructure and mechanical properties of 316L stainless steel’, Proceedings of the  International Conference on Advanced Materials and Energy Technology’, 17-19 December, 2014, IIEST Shibpur, Howrah, India.
  15. K. Chattopadhyay, V. Pandey, N.C.S.Srinivas, V. Singh, ‘Effect of surface nanostructuring on tensile and LCF behaviour of AA 2014’, 6th International Conference on Nanomaterials by Severe Plastic Deformation, Metz, France, June, 2014 (IOP Conference Series: Materials Science and Engineering)
  16.  Awani Bhusan, Debasis, Khan, K. Chattopadhyay, S.K. Panda, ‘Finite Element Evaluation of J- integral in 2D and 3D for Nuclear Grade Graphite’, 23-26 August, 2015, Proceedings of the Advanced Materials World Congress (AMWC), Sweden.
  17. Sanjeev Kumar, K. Chattopadhyay, Vakil Singh, Effect of surface nanostructure on LCF behavior of Ti‒6Al‒4Valloy, Proceeding of 7th International Conference on Creep, Fatigue and Creep-Fatigue Interaction, IGCAR, Kalpakkam, INDIA, (2016) pp. 398–403
  18.  V. Pandey, K. Chattopadhyay, N.C.S.Srinivas, V. Singh, ‘Effect of stress relieving treatment on low cycle fatigue behavior of USSP treated 7075 aluminium alloy 7th International Conference on Nanomaterials by Severe Plastic Deformation, Sydney, Australia, July 2-8, 2017 (IOP Conference Series: Materials Science and Engineering)
  19.  S.C. Ram, K. Chattopadhyay, I. Chakrabarty, ‘Effect on microstructures, hardness and SDAS of primary Mg2Si/Al-Si eutectic phases of centrifugally cast functionally graded Al-(Mg2Si)p in-situ composites’, The 3rd International Conference on Materials and Manufacturing Engineering 2018, March 8-9, 2018, Tamilnadu, India. IOP Conference Series: Materials Science and Engineering 390 (1), 012012.  
  20.  I. Chakrabarty, S.C. Ram, and K. Chattopadhyay, ‘Study on Centrifugally Cast Functionally Graded Al-Mg2Si In-Situ Composites, Proceedings of the Liquid Metal Processing & Casting Conference 2019, September 8-11, 2019, Birmingham, UK.
  • Structure-property correlation of refractory silicide based alloy and composite’ The Fourth Asian Particle Technology Symposium, 14-16 September, 2009, New Delhi, India.
  •  Mechanical properties of materials’, in orientation programme for executives of Maruti Suzuki, 12-22 February, 2014, Dept. of Metallurgical Engg., IIT(BHU).
  •  ‘Mechanical working and processing maps, in orientation programme for executives of Maruti Suzuki, 12-22 February, 2014, Dept. of Metallurgical Engg., IIT(BHU).
  •  ‘Advanced automotive materials’, in Three-Day Workshop on Metallurgy for Non-metallurgist held on 8-10 December, 2015 in Metallurgical Engg., IIT (BHU)
  •  ‘Effect of Ultrasonic shot peening on microstructure and mechanical properties of 316L stainless steel’ in International Conference on Advanced Materials and Energy Technology’, 17-19 December, 2014, IIEST Shibpur, Howrah, India.
  •  ‘Low cycle fatigue behaviour of nanostructured Ti-6Al-4V subjected to ultrasonic shot peening’, The 4th International Conference for Advanced Materials and Materials Processing (ICAMMP-IV) during 5th to 7th Nov 2016 held at IIT Kharagpur, India.
  •  ‘Mechanical Testing of Steels’, in Short Term Course for Teachers of AICTE approved colleges/Universities (Category I) and Continuing Education Programme for working professionals (Category II) on STEEL TECHNOLOGIES on 2-9 March, 2017, IIT(BHU)
  •  ‘Effect of ultrasonic shot peening on microstructure and mechanical properties of Superalloy IN718’, presented in National Metallurgist Day-Annual Technical meeting during 14-16 November, 2018, Kolkata, India.
  •  ‘Development of low modulus Ti alloy for biomedical applications’, presented in National Metallurgist Day-Annual Technical meeting during 14-16 November, 2018, Kolkata, India.
  •  ‘Effect of ultrasonic shot peening on microstructure, corrosion and LCF behaviour of Al-7075 alloy’, Department of Metallurgical and Materials Engineering, IIM Kharagpur Chapter, on 28 February 2019.
  •  ‘Metallurgical Embrittlement and Failure’, AICTE sponsored QIP STC and CEP on 'Metallurgical Failures' during February 18-23, 2019, Dept. of Metallurgical Engineering, IIT(BHU).
  •  ‘Mathematical Approach of Deformation and Fracture’, QIP Short-term course on Mathematical Modeling and Analysis on Continuum Mechanics, during 9-15 September, 2019, IIT(BHU).
  •  Attended GTMAP workshop at Lecture Theatre, Department of Materials Engineering, IISC, on 19 July 2019.
  •  ‘Enhancement of Low Cycle Fatigue Life of the Superalloy IN718 through Surface Mechanical Attrition Treatment’, International Conference on Advanced Materials and Processes for Defence Applications, September 23-25, 2019, Courtyard by Marriott Hyderabad, India.
  •  ‘Microstructure and Low Cycle Fatigue Behaviour of Surface Modified AA 7075 Alloy’, APMC 12: 12th Asia Pacific Microscopy Conference, 3-7 February, 2020, International Convention Centre, Hyderabad, India.
  •  ‘Surface modification and its effect on Microstructure, Low cycle fatigue, and Corrosion behavior of Al-7075 Alloy’ Department of Metallurgical & Materials Engineering, VSSUT, Burla, TEQIP-III sponsored FDP Webinar on “Advanced Materials Processing, Characterization, and Application (AMPCA-2020)”, from 8th-12th September 2020.
  •  ‘Thermo-mechanical processing of materials’, QIP sponsored short-term course on Theoretical and Practical Perspective on Materials Manufacturing Technology (TPPMMT-2021), held between 8-13 March, 2021, IIT Kanpur.

1. Member of technical team, International Conference NMD-ATM 2013, Department of Metallurgical Engineering, IIT(BHU), Varanasi, India.
2. Convener, Three – Day Workshop on Metallurgy for Non-Metallurgists (MNM-2015), Organised by IIT(BHU), Department of Metallurgical Engineering and TR Anantharaman Education And Research Foundation, Hyderabad , (December 08-10, 2015 at Department of Metallurgical Engineering, IIT (BHU), Varanasi, India)
3. Treasurer, EMSI 2016, International Conference on Electron Microscopy and XXXVII annual Meeting of Electron Microscope Society of India, 2016.
4. Coordinator of AICTE-QIP sponsored one-week short-term course and continuing education programme on ‘Mechanical Properties and Deformation Behavior of Structural Materials’ (MPDB-2018), 27 September – 1 August, 2018.

1. Vice-Chairman of Squash, IT-Gymkhana, BHU, (2008-09)
2. Honorary Treasurer (Executive member of IIM),Varanasi chapter, Metallurgical Engineering Department, IT-BHU, Varanasi, UP, India (May 2010- April 2015)
3. Departmental Representative of Senate Library Committee, IIT (BHU), (2013-14)
4. Warden, S C De Hostel, IIT (BHU) (2013 - 2016), C V Raman Hostel (2017-2019)
5. Member Secretary, Departmental Purchase Committee, IIT (BHU), 2013-14.
6. Member of DUGC and DPGC, Metallurgical Engineering, IIT(BHU), Varanasi, UP, India. (2014- till date).
7. Convener, DUGC, Metallurgical Engineering, IIT(BHU), Varanasi, UP, India. (2020-2021).
8. Honorary Secretary (Executive member of IIM),Varanasi chapter, Metallurgical Engineering Department, IIT(BHU), Varanasi, UP, India (May 2015- 2017)
9. Member, Academic Automation Coordination Committee, IIT (BHU), 2015.
10. Vice-chairman, IIM, Varanasi chapter, Metallurgical Engineering, IIT(BHU), Varanasi, UP, India. (2017-2019).
11. Chairman, IIM, Varanasi chapter, Metallurgical Engineering, IIT(BHU), Varanasi, UP, India. (2019 - 2021).
12. Council member, Indian Institute of Metals, 2020-2021.
13. Executive member of IIM, Varanasi chapter, Metallurgical Engineering, IIT(BHU), Varanasi, UP, India. (2021 – till date)
14. Member of DFAC, Metallurgical Engineering, IIT(BHU), Varanasi, UP, India. (2021- till date).

  1. National Scholarship Holder in Class VII, X and XII.
  2. All India Ranking 54th in Graduate Aptitude Test for Engineers (GATE).
  3. Second Prize winner in oral presentation in National Metallurgist Day-Annual Technical meeting in November, 2004 (IIM), Thriuvananthapuram, India.
  4. Second Prize winner in poster presentation in National Metallurgist Day-Annual Technical meeting in November, 2006 (IIM), Jamshedpur, India.
  5. Received ‘ARCI Technical Excellence Award’ in International Symposium for Research Scholars (ISRS) in December, 2006, IITM, Chennai, India
  6. Awarded Senior Research Fellowship CSIR (Individual) 2007
  7. IEI Young Engineers Award-2011-12" in Metallurgical and Materials Engineering discipline by the Institution of Engineers (India), Kolkata.  
  1. Life Member of Indian Institute of Metals (IIM).
  2. Life Member of Electron Microscopy Society of India (EMSI).